Agilent Catalog 4

G7121-68001, FLD wavelength calibration kit, includes calibration sample (1g Glycogen), syringe filters 100/pk, syringe, needle, fittings, instructions

G1321-60015, Flow cell, 4 μL, 20 bar (pH 1 – 9.5 )

G1321-60005, Flow cell, 8 μL, 20 bar (pH 1 – 9.5 )

9301-1446, Glass syringe, 1 mL, luer tip, 0.05 scale

1970-0201, Photomultiplier, 1046A

5062-2462, PTFE tubing, 0.7 mm id, 1.6 mm od, 5 m

5965-0027, ScrewDriver hex 4mm

5965-0028, ScrewDriver hex2.5MM

9301-0407, Syringe needle, square end point style

8710-0510, Wrench, open-ended, 1/4 in and 5/16 in

2140-0600, Xenon FLD flash lamp

01100-68700, 256 MB Compact Flash Card (obsolete with no replacement)

G1314-67189, Bio VWD repair kit for micro flow cell

G1315-68712, Cell repair kit for standard flow cell, for Agilent diode array and multiple wavelength detectors

G1314-68705, G1314A VWD accessory kit

G4212-68001, Inline pressure relief valve kit

G4208-68700, USB Memory Stick for G4208A

G1315-68713, VWD and DAD/MWD semi-micro cell repair kit

G1314-65054, VWD high pressure flow cell kit

G1314-65052, VWD micro flow cell kit

G1314-65056, VWD semi-micro flow cell kit

G1314-65061, VWD standard D-type flow cell kit

G1314-67188, Window Kit for Bio VWD Standard Flow Cell

8710-2699, 3 mm wrench for nebulizer needle adjustment

8660-0827, Abrasive mesh, 4000 grit (4 µm)

G1964-20050, AJS spray shield

G1946-68702, APCI nebulizer accessory kit

G2428A, APCI nebulizer needle

G1960-20030, APCI nebulizer needle

G1946-68704, APCI needle replacement kit

G1971-60025, APPI Lamp

BHT-4, Big Hydrocarbon Trap, 1/4 in, 250 psig

BMT-4, Big Moisture Trap, 1/4 in, 250 psig

RMSN-4, Big universal trap, Nitrogen, 1/4 in, 300 psig

RMSN-2, Big universal trap, Nitrogen, 1/8 in, 300 psig

9300-2576, Bottle, 125 mL, clear, borosilicate glass

392027000, Calibration gas chamber, 1/pk

9300-2575, Cap, for fluorocarbon carbon, 33 mm

393753005, Capillary assembly, 600 µm id

G1946-80054, Capillary cleaning wire

G1964-80659, Capillary, 6-inlet, 0.61 mm x 90 mm, 1G, hexabore resistive capillary for the Agilent 6400 Series Triple Quadrupole LC/MS, samples up to 10x more ion rich gas from the source

G2440-60200, Channel electron multiplier assembly, ceramic

G2441-80010, Channel electron multiplier assembly, ceramic

G1960-80103, Channel electron multiplier, low gain, for LC/MS

0100-0549, Clamping ring, NW 20/25, stainless steel, filter extender tube, for the Agilent Quiet Cover

5190-1401, Cleaning powder, dielectric capillary, for ion transfer capillary cleaning

05980-60051, Cloth, lint-free, 23 x 23 cm, 100% cotton, 15/pk

0100-1597, Co-seal, NW 20/25, filter extender tube, for the Agilent Quiet Cover

1460-2717, Contact Spring BeCu

G1947-20029, Corona needle (each)

G1947-60103, Corona needle holder assembly, TOF 62XX series

3050-1167, Curved Washer

G2571-80103, Electron multiplier horn, high gain

5191-4192, Emitter, 10 µm, with silica-tip, uncoated

G1978-60060, End cap assembly, Multimode

G1982-20111, End cap, nano

G1946-68703, ESI nebulizer kit. Includes needle holder, ferrule, and ESI needle

G1960-80060, Fast Switch Capillary, 0.6 MM

G1946-20213, Ferrule, for nebulizer needle, graphite-filled polyimide, 0.3 mm

0100-2051, Filter element, 5 µm, 5/pk

5190-7004, Filter element, HEPA, NW25/40

5188-1181, Filter extender tube, NW 25 x 100 mm, for Agilent Quiet Cover on LC/MS, GC/Q-TOF, and ICP-MS instruments

G1946-20301, H.T. Capillary cap

393781401, Ion guide assembly

G7604-60001, Ion injector, 180 mm, 0.5 mm id, dielectric

G7604-60000, Ion injector, 180 mm, 0.6 mm id, dielectric

G1958-68000, Jet Stream heater replacement kit. Includes clean heater core, nitrile gloves, 2.5 mm Allen wrench, screened heater assembly, instructions

G1946-60157, LC/MSD tool kit

1460-2716, Locking Spring, Stainless

0515-1602, Machine screw, 6 lobe socket, flat head, M2 x 0.4, 6 mm long

1000-1541, Magnifier, pocket scope, 40x, Al alloy

5183-2014, Maintenance Kit, LC/MS Nitrogen Generator

G1964-80661, Multicapillary inlet ion drift tube, 6 capillaries, 0.59 mm x 90 mm, 120M

G1960-20310, Narrow bore capillary cap

G1946-20202, Neb O-ring retainer

G1946-20175, Neb square nut

GT430-20470, Nebulizer adjustment fixture

G1960-67470, Nebulizer adjustment kit

G1946-67037, Nebulizer assembly, APCI, tested

G1946-67098, Nebulizer assembly, ESI, tested

G1946-67260, Nebulizer assembly, microflow

G1958-60137, Nebulizer needle kit, 316 stainless steel, includes needle holder, ferrule, and ESI needle

G1960-20032, Nebulizer needle, ESI

G1958-67098, Nebulizer support assembly, ES, tested

G1946-20274, Needle holder, flanged

5183-2003, Nitrogen Gas Generator

2740-0001, NUT-HEX-DBL-CHAM 10-32-THD .109-IN-THK

390596009, O-ring baked 0.348 od

2140-0826, Obsolete. Replaced by 0960-3409

3150-0559, Particle beam frit pack 10/pk

5190-9008, Performance maintenance kit, LC/MS, for 1 MS40+ pump, Jet Stream equipped

5190-9009, Performance maintenance kit, LC/MS, for 2 MS40+ pumps, Jet Stream equipped, in Agilent 6490 LC/MS with iFunnel

5190-9006, Performance maintenance kit, LC/MS, for Edwards pump

5190-9007, Performance maintenance kit, LC/MS, for MS40+ pump, Jet Stream equipped, single bore capillary instruments

8710-0004, Pliers, needle nose

5190-1443, QuickPick LC/MS PM kit. Includes oil, oil mist filter, N2 purifier, coil spring, rotor seal, LC filter

0100-1854, Rotor seal, Tefzel, for p/n 0101-0920 valve

0100-1855, Rotor seal, Vespel, for p/n 0101-0920 valve

G1946-20089, Skimmer 1

G1946-20087, Skimmer 2

393750103, Skimmer, 0.9 mm hole for 0.5 mm capillary

393750102, Skimmer, 1.7 mm hole, 500MS, 1/pk

G1956-20302, Skimmer, high throughput, 1.6 mm

G1969-20302, Skimmer, high throughput, 2.0 mm

393733701, Spray plate

393755401, Spray plate support

G1946-20157, Spray shield (end cap)

G1958-20050, Spray shield, small

5080-5400, Swabs, cotton, 100/pk

9301-1291, Syringe adapter

G1972-60025, Target plate for AP-MALDI LC/MS

0100-0969, Tee, 1/16 in, 316 SST, low dead volume

G2581-80875, Tip seal replacement kit, for Agilent TriScroll-800 dry vacuum pump

8710-1622, Torx driver, T15

8710-1615, Torx driver, T20

8710-1930, Tubing cutter, for plastic/PEEK tubing

0890-1921, Tubing, 0.03 in ID, 1/16 in OD,1.5m PEEK

G1316-67005, Valve kit, 2 position/6 port, 400 bar

8710-0806, Wrench, open-ended, 1/2 in and 7/16 in

8710-0510, Wrench, open-ended, 1/4 in and 5/16 in

0100-1619, Zero dead-volume union, stainless steel 10-32 coned female

5022-6531, Glass Test Tubes, 12 x 100 mm, 250/pk

5022-6534, Glass Test Tubes, 12 x 48 mm, 100/pk

5022-6532, Glass Test Tubes, 16 x 100 mm, 250/pk

5022-6533, Glass Test Tubes, 16 x 48 mm, 100/pk

5042-6459, Round bottom glass test tube, 25 x 100 mm 100/pk

5042-6458, Round bottom glass test tube, 30 x 100 mm 100/pk

5042-6470, Round bottom glass test tube, 30 x 48 mm 100/pk

5190-9093, Test tubes, 12 x 150 mm, 11 mL, 250/pk

5190-9092, Test tubes, 16 x 150 mm, 21 mL, 250/pk

5190-9091, Test tubes, 25 x 150 mm, 55 mL, 100/pk

5190-9090, Test tubes, 30 x 150 mm, 78 mL, 100/pk

5043-9315, 384-well plate, 0.19 mL, square wells, V shape, polypropylene, 22mm, 25/pk

5065-4402, 96 Well Plates with glass inserts, caps, septa preassembled, 0.35 mL

5043-9314, 96-well plate, 0.33 mL, round wells, V shape, polypropylene, 14 mm, 100/pk

5043-9313, 96-well plate, 0.33 mL, round wells, V shape, polypropylene, 14 mm, 50/pk

5043-9311, 96-well plate, 0.5 mL, round wells, U shape, polypropylene, 14 mm, 120/pk

5043-9310, 96-well plate, 0.5 mL, round wells, U shape, polypropylene, 14 mm, 30/pk

5043-9305, 96-well plate, 1.0 mL, round wells, U shape, polypropylene, 32 mm, 50/pk

5043-9309, 96-well plate, 1.2 mL, round wells, U shape, polypropylene, 27 mm, 50/pk

5043-9302, 96-well plate, 2.0 mL, round wells, U shape, polypropylene, 45mm, 30/pk

5043-9300, 96-well plate, 2.2 mL, square wells, U shape, polypropylene, 41 mm, 30/pk

5042-8502, 96-well sample plates

5043-9312, Agilent 96-well plate, 0.33 mL, round wells, V shape, PP, 14 mm, 25/pk

5043-9308, Agilent 96-well plate, 1.2 mL, round wells, U shape, polypropylene, 27 mm, 25/pk

5188-5322, Cap for 350 µL glass insert, 1000/pk

5042-1389, Closing mats for 96 well plates, silicone 50/pk

5188-5321, Glass inserts, 350 µL, 960/pk

5043-9320, Sealing mat, 384 wells, square, preslitted, silicone, 50/pk

5043-9318, Sealing mat, 96 wells, round, preslitted, silicone, 100/pk

5043-9317, Sealing mat, 96 wells, round, preslitted, silicone, 50/pk

5043-9319, Sealing mat, 96 wells, square, preslitted, silicone, 50/pk

0101-0921, 2-position/6-port injection valve, 400 bar

0101-1422, 2-position/6-port injection valve, 600 bar

5067-4131, 2-position/6-port injection valve, bio-inert

1535-4045, Bearing ring for 2D-LC valve head, 1300 bar

5067-4114, Injection valve actuator

0100-1852, Isolation seal for valves 0101-0921 and 0101-0920

5068-0209, Rotor seal, 2 grove, elongated groove, for 1260 Infinity II multisampler (G7167A)

5068-0229, Rotor seal, peripheral valve, 1300 bar

5068-0232, Rotor seal, valve DN

5068-0099, Rotor, 2 position/6 port bio valve, 600 bar

5320-0010, Rotor-2pos-6port Bio-Multisampler

5068-0215, Stator for 2-position/6-port injection Valve, 600 bar

5068-0006, Stator head, 2-position/6-port valve (p/n 5067-4117 or 5067-4241), maximum pressure 1300 bar

0101-1417, Stator, 2-position/6-port injection valve, maximum pressure 600 bar

5068-0267, Stator, for 6-port injection valve, 600 bar, 1260 Infinity II Preparative Autosampler G7157A

0101-1232, 2-position 6-port prep manual injection valve

5067-1503, Adapter, PEEK, female 1/8 inch to male 1/16 inch, 4/pk

1535-4045, Bearing ring for 2D-LC valve head, 1300 bar

G9321-68013, Extension kit for preparative LC loops, 1/8 in od

5067-6831, Holder, for mounting the preperative manual injector to the prep column organizer

5067-6845, Internal reducers (IZR) stainless steel, female 10-32 to male 5/16-24 coned

1535-4046, Isolation Seal, for manual injection valves of series 7725, 9725, 3725

5068-0319, Maintenance kit for preparative manual injectors

5067-4202, Manual injection valve 2 position/6 port, 600 bar, for 1220 sampler

5065-9922, Manual injection valve kit, stainless steel, prep

5063-6502, Manual injection valve, 2 position/6 port valve 7725i, 400 bar, with position sensing switches

5067-4191, Manual injection valve, 2 position/6 port valve 7725i, 600 bar, with position sensing switches

0101-1231, Manual injection valve, PEEK, 3725i prep valve, with position sensing switches

0101-1253, Manual injection valve, PEEK, 9725i valve, 400 bar, with position sensing switches

5067-6852, Manual Injector Holder for Prep Column Compartment

1400-3166, Mounting bracket, to mount Rheodyne manual injection valve to ring stand

0490-1849, Position sensor switch for manual valves

1535-4048, Rotor seal for Rheodyne 7010, 7000, 7040, Vespel

0101-1235, Sample loop, PEEK, 1 mL, 0.76mm ID

0101-1227, Sample loop, PEEK, 10 mL, 2.00mm ID

0101-1242, Sample loop, PEEK, 100 µL, 0.51mm ID

0101-1234, Sample loop, PEEK, 2 mL, 0.76mm ID

0101-1229, Sample loop, PEEK, 2 mL, 1.60mm ID

0101-1239, Sample loop, PEEK, 20 µL, 0.25mm ID

0101-1226, Sample loop, PEEK, 20 mL, 2.00mm ID

0101-1237, Sample loop, PEEK, 200 µL, 0.51mm ID

0101-1241, Sample loop, PEEK, 5 µL, 0.18mm ID

0101-1230, Sample loop, PEEK, 5 mL, 0.76mm ID

0101-1228, Sample loop, PEEK, 5 mL, 1.60mm ID

0101-1238, Sample loop, PEEK, 50 µL, 0.51mm ID

0101-1236, Sample loop, PEEK, 500 µL, 0.76mm ID

0101-1245, Sample loop, stainless steel, 1 mL, 0.76mm ID

0101-1219, Sample loop, stainless steel, 1 mL, 0.76mm ID

0101-1240, Sample loop, stainless steel, 10 µL, 0.25mm ID

0100-1923, Sample loop, stainless steel, 10 µL, 0.30mm ID

0101-0376, Sample loop, stainless steel, 10 µL, 0.30mm ID

5067-7032, Sample loop, stainless steel, 10 mL, 1/8 in od

0100-1921, Sample loop, stainless steel, 100 µL, 0.51mm ID

0101-0379, Sample loop, stainless steel, 100 µL, 0.51mm ID

0101-1250, Sample loop, stainless steel, 2 mL, 1.00mm ID

0101-1244, Sample loop, stainless steel, 2 mL, 1.00mm ID

0100-1922, Sample loop, stainless steel, 20 µL, 0.30mm ID

0101-0377, Sample loop, stainless steel, 20 µL, 0.51mm ID

5067-7033, Sample loop, stainless steel, 20 mL, 1/8 in od

0101-1247, Sample loop, stainless steel, 200 µL, 0.76mm ID

1535-4860, Sample loop, stainless steel, 5 µL, 0.18mm ID

0101-1248, Sample loop, stainless steel, 5 µL, 0.18mm ID

0101-1243, Sample loop, stainless steel, 5 mL, 1.00mm ID

0101-1249, Sample loop, stainless steel, 5 mL, 1.00mm ID

5067-7031, Sample loop, stainless steel, 5 mL, 1/8 in od

0101-0378, Sample loop, stainless steel, 50 µL, 0.51mm ID

0100-1924, Sample loop, stainless steel, 50 µL, 0.51mm ID

0101-1246, Sample loop, stainless steel, 500 µL, 0.76mm ID

0101-1251, Sample loop, stainless steel, 500 µL, 0.76mm ID

5068-0321, Stator face seal, for 1260 Infinity II preperative manual injector

5068-0320, Stator manual prep injector

5067-4158, Valve head, bio-inert, 2-position/6-port manual injection valve with needle port

G7131-60021, 1290 Passive Inlet Valve Bio

5068-0005, 5 position/7 port 1200 Bar rotor seal

G5611-60025, Active inlet valve, Bio-inert, without cartridge

G1312-60025, Active inlet valve, without cartridge

5062-8562, Cartridge for Active Inlet Valve, 400 bar

G1312-60020, Cartridge for Active Inlet Valve, 600 bar

G5611-60020, Cartridge for Active Inlet Valve, bio-inert, 600 bar

R007101716, Cartridge, check valve inlet, 1/8 inch, for PEEK 50 mL and 100 mL heads

R007101717, Cartridge, check valve outlet, 1/8 inch, for PEEK 50 mL and 100 mL heads

G7161-60052, Check valve assembly double seat, inlet/outlet,

5067-6642, Check valve assembly, inlet/outlet, for G7161A/B preparative pump, with 50mL/min pump head

G7161-20083, Check valve holder, inlet

5022-2192, Filter assembly, preparative, 12.7mm ID, 2 µm, SST

G4204-60004, Filter, outlet, pump head, 4.6 mm ID, 5µm

5067-5716, Frit for Agilent 1290 Infinity LC pump outlet filter, 2/pk

5320-0048, Frit, Outlet Filter Bio Flexible Pump, 2/pk

01018-22707, Frit, PTFE, 5/pk

G4220-20020, Gold seal, for 1290 outlet valve

5067-4717, Inlet valve for flush pump

G4302-60066, Inlet valve for SFC pump,

G4220-60122, Inlet valve, type N, for normal phase applications, 1300 bar

G7131-60022, Inlet Valve Universal, bio compatible

G4204-60122, Inlet-Valve 1290-planar normal phase

G4301-60501, Low dispersion nozzle kit, for 1260 Infinity II SFC control module G4301A

G4220-60028, Outlet valve, 1300 bar

G1312-60067, Outlet valve, 600 bar

G5611-60067, Outlet valve, Bio-inert, 600 bar outlet ball valve

G1312-60167, Outlet valve, Type N, for normal phase application, 600 bar

G4220-60128, Outlet valve, type N, for normal phase applications, 1300 bar

G4204-60022, Passive inlet valve Valve

G4220-60022, Passive inlet valve Valve, 1200 bar, 1300 bar

G1312-60066, Passive Inlet Valve, 600 bar

G1312-60166, Passive inlet valve, type N, for normal phase applications, 600 bar

G4204-40005, PEEK seal, for 1290 inlet valve

G1312-60071, Purge Valve long with PTFE frit, 600bar

G7161-60036, Purge valve prep

G7111-60061, Purge valve, short, with PTFE frit, 600 bar

5068-0377, Rotor 5pos/7port purge valve 1300bar bio

5068-0379, Rotor Seal 9-Port Purge Valve

5068-0123, Rotor, 8-position/9-port, purge valve, 1200 bar

5068-0201, Rotor, PEEK, 1300 bar, for 1290 Infinity II high speed pump (G7120A)

5067-4728, Seal cap

5063-6505, Sieve for outlet valve G1312-60012

5068-0376, Stator for 5pos/7port purge valve1300bar-MP35N

5068-0004, Stator head, 5-position/7-port purge valve, maximum pressure 1300 bar

5068-0001, Stator, 8-position/9-port valve

5043-0269, Adapter profile, for G1170A Infinity valve drive

5068-0257, Bearing ring, PEEK

5067-5708, Capillary kit, for Agilent Online-SPE Starter Set G4742A

5067-4296, Capillary kit, for online SPE multi cartridge solution

5067-4266, InfinityLab active solvent modulation valve, for 2D-LC , 1300 bar

5320-0017, InfinityLab Bio 2D-LC Active Solvent Modulation valve, 1300 bar

5067-4244, InfinityLab duo valve head, 2-position/4-port, for 2D-LC, 1300 bar

5067-4294, Online SPE starter kit, includes tubing, fittings, 3 cartridges, method and technical note

5068-0240, Rotor seal, for 2D-LC valve active solvent modulation, 1300 bar

5067-5424, Sample loop, stainless steel, 20 µL

5067-5425, Sample loop, stainless steel, 40 µL

5067-5437, Sample loop, stainless steel, 60 µL

5067-5426, Sample loop, stainless steel, 80 µL

5299-0005, Stator for InfinityLab Bio 2D-LC ASM Valve

5068-0322, Stator for InfinityLab Quick Change 2-Position/14-Port Prep Valve

5068-0115, Stator head for 2D-LC Valve, 1300 bar, for Agilent 1290 Infinity 2D-LC Solution

5068-0239, Stator head, for 2D-LC valve active solvent modulation, 1300 bar

G4242-64000, Valve, multiple heart-cutting

01100-68700, 256 MB Compact Flash Card (obsolete with no replacement)

8710-2699, 3 mm wrench for nebulizer needle adjustment

8660-0827, Abrasive mesh, 4000 grit (4 µm)

19251-00100, Angled wrench for split/splitless septum nut

G7132-42000, Bio Pump Head Mounting assistance

5023-0282, Bit kit for torque wrench

5043-0277, Blank nut, PEEK-ST, long, finger-tight

5067-6127, Blank nut, plug, stainless steel, for 10-32 coned fitting ports

01080-83202, Blank nut, stainless steel, for 1/16 inch Swagelok fitting ports

5067-6141, Blank nut, stainless steel, for M4 port

01046-60105, Cable, universal data

G1312-67500, Calibration capillary assembly

G1946-80054, Capillary cleaning wire

5065-4493, Capillary stainless steel 0.25 x 4000 mm U/U

5181-8836, Ceramic scribe column cutter, 4/pk

8710-1346, Cleaning brush for split/splitless inlet split vent fitting, FID, collectors

5190-1401, Cleaning powder, dielectric capillary, for ion transfer capillary cleaning

05980-60051, Cloth, lint-free, 23 x 23 cm, 100% cotton, 15/pk

G4296-68715, Compact tool kit

5183-4620, Cutting tool, for fused silica tubing, with rotating diamond blade

5183-4670, Diamond blade replacement kit for CE column cutter

440-1000, Ferrule removal tool

RFT-2500, Ferrule removal tool, 0.25-0.32 mm

RFT-5300, Ferrule removal tool, 0.53 mm

RF0094T, Ferrule, red, outer diameter 1/32 inch

5062-8519, Ferrule, Tefzel, yellow, 1/8 in ID, 8/pk

5188-8057, Fraction collection remote Y-cable, 3000 mm length, for connecting the fraction collector with the MS instrument

9301-1446, Glass syringe, 1 mL, luer tip, 0.05 scale

G4220-20013, Hex bit, 4 mm, 89 mm length

5023-2504, Hex driver, slitted, SW-4

5023-2503, Hex driver, SW-5 slotted

5023-2502, Hex driver, SW-6,35 slotted, tool for standard capillary fittings

8710-2394, Hex key, 9/64 in, 15 cm, T-handle

G7120-68708, InfinityLab system tool kit, for Infinity II LC instruments

79841-65501, Injector lubricant, PTFE

01018-23702, Insert tool, for inserting wash seals

5023-2524, LC tools, hex key kit

G1946-60157, LC/MSD tool kit

430-1020, Magnifier, 20X

1000-1541, Magnifier, pocket scope, 40x, Al alloy

89075-23800, MCT Adjustment Tool

0100-1710, Mounting tool for flangeless nuts

5043-0915, Mounting tool, plastic

8710-1217, Nut driver, 7 mm

2140-0826, Obsolete. Replaced by 0960-3409

8710-0004, Pliers, needle nose

8710-2790, Screw driver, torque, preset adjustable

5965-0027, ScrewDriver hex 4mm

5965-0028, ScrewDriver hex2.5MM

RF0005T, Screwdriver, green handle, star shaped

8710-0899, Screwdriver, Pozidriv, # 2-4 screws

8710-0900, Screwdriver, Pozidriv, # 5-10 screws

5182-3465, Screwdriver, Torx, T20

5067-6197, Seal Handling Device for inserting seals into the 1260 LC series pump heads during maintenance

450-1000, Septum removal tool, knurled handle

5067-4124, Shutoff valve

79835-87330, Solvent mixer

5080-5400, Swabs, cotton, 100/pk

9301-1291, Syringe adapter

9301-0407, Syringe needle, square end point style

5021-1831, Test Capillary 0.25 x 500 mm no fittings

G1377-44900, Tool for Micro seat capillary mounting

G4581-20522, Torque driver extension

5190-9571, Torque driver kit

G4220-20041, Torx bit, 10 x 25 mm

5182-3466, Torx driver, T10

8710-1622, Torx driver, T15

8710-1615, Torx driver, T20

8710-1931, Tubing cutter blades, for cutting plastic/PEEK tubing

8710-1708, Tubing cutter blades, for Hi-Duty, 5/pk

8710-1709, Tubing cutter, for copper tubing

8710-1707, Tubing cutter, Hi-Duty, for 1/8 in tubing

5190-1442, Tubing cutter, Precision, for 1/16 in stainless steel tubing

8710-0007, Tweezer, 4 3/4 in long

5067-6605, UIB Clamp Guide Kit

5022-2146, Union Adjustment Tool

G4208-68700, USB Memory Stick for G4208A

5062-2486, Velocity regulator 3/pk

590-3003, Window Etching tool, 3/pk

8710-1712, Wrench, adjustable, 12 in

8710-2800, Wrench, open end, 0.25 inch

8710-2801, Wrench, open end, 0.3125 inch

8720-0025, Wrench, open ended, 1/2 and 9/16 inch

5067-5691, Wrench, open, 19 mm

8710-0806, Wrench, open-ended, 1/2 in and 7/16 in

8710-0510, Wrench, open-ended, 1/4 in and 5/16 in

8710-1841, Wrench, open-ended, 12 mm

8710-2435, Wrench, open-ended, 14 and 17 mm

8710-1924, Wrench, open-ended, 14 mm and 14 mm

8710-1534, Wrench, open-ended, 4 mm

8710-0972, Wrench, open-ended, 7/16 in and 3/8 in

8710-0803, Wrench, open-ended, 7/16 in and 9/16 in

8720-0010, Wrench, open-ended, 9/16 in and 5/8 in

5067-5688, Wrench, torque, 1 to 25 Nm, with 14 mm open wrench

8005-0508, Agilent check valve cartridge, for 515/1525 pumps, 600 multisolvent systems, for Waters 2695/2695D/2795 Separations Modules, 1/pk

8005-0513, Agilent check valve cartridge, for Waters 1515/1525/515/510/2695D/600E/610/LC Module 1 pumps, similar to Waters 700000254

8005-0537, Agilent check valve cartridge, for Waters 2690D/2695D/2790/2795/GPC 2000 pumps, similar to Waters WAT270941, 2/pk

8005-0509, Agilent check valve housing, for Waters 1515/1525/515/600E/LC Module 1 pumps, 2/pk

8005-0514, Agilent clear plunger seal, for Waters 2690/2695(D) pumps, 2/pk

8005-0536, Agilent face seal kit, for Waters 2690D/2695D/2790/2795/GPC 2000, similar to Waters WAT270939, 4/pk

8005-0528, Agilent outlet check valve rebuild kit, ball and seat, for Waters 510/515/600E/610/LC Module 1 pumps, contains parts to rebuild 2 check valves

8005-0535, Agilent plunger seal kit, yellow, for Waters 2690D/2695D/2790/2795 Separations Modules, Alliance GPC/V 2000, similar to Waters WAT270938, 2/pk

8005-0530, Agilent plunger seal, black, 225 µL, for Waters pumps, similar to Waters WAT026644

8005-0541, Agilent plunger seal, black, for Waters 2690D/2695D/2790/2795 Separations Modules, similar to Waters WAT271066, 2/pk

8005-0524, Agilent plunger seal, clear, for Waters pumps, similar to Waters WAT022934

8005-0525, Agilent plunger seal, clear, for Waters pumps, similar to Waters WAT022946, 4/pk

8005-0529, Agilent plunger seal, graphite filled PTFE, black, for Waters pumps, similar to Waters WAT026613

8005-0538, Agilent plunger, sapphire, for Waters 2690D/2695D/2790/2795/2796 Separations Modules, similar to Waters WAT270959

8005-0531, Agilent plunger, sapphire, for Waters 616/626 LC systems, similar to Waters WAT031788

8005-0533, Agilent plunger, sapphire, for Waters pumps, similar to Waters WAT069511

8005-0911, Agilent reference valve rebuild kit, for Waters 1515/1525/515/510/600E/610 pumps, similar to Waters WAT025746

8005-0523, Agilent sapphire plunger, for Waters 515/1515/1525 pumps, similar to Waters WAS207069

8005-0539, Agilent seal wash face seal, for Waters 2690D/2695D/2790/2795/GPC 2000, similar to Waters WAT271017

8005-0540, Agilent seal wash plunger seal, for Waters 2690D/2695D/2790/2795/GPC 2000, similar to Waters WAT271018, 2/pk

8005-0515, Agilent standard plunger seal, for Waters 2796, 2/pk

8005-0421, Needle wash frits, for Waters Alliance systems, 5/pk

8005-0552, Seal pack, with needle kit, for Waters 717 autosampler

8005-0704, Agilent deuterium lamp, for Waters 2487/2488 UV-Vis and Acquity TUV, 2000 hours, similar to Waters WAS081142

8005-0702, Agilent deuterium lamp, for Waters 486 TUV and LC module 1, 2000 hour, similar to Waters 700000356

8005-0705, Agilent deuterium lamp, for Waters 996, 2996/Acquity 2996 photo-diode array detectors, 2000 hour, similar to Waters WAT052586

8005-0837, Agilent compression screw, stainless steel, 1/16 inch od, for Waters systems 10/pk

8005-0835, Agilent compression screws and ferrules, for Waters LC systems, 5/pk, similar to Waters WAT025604

8005-0812, Agilent tubing, PEEK, 0.12 x 520 mm, for Waters

8005-0824, Agilent tubing, SS, 0.23 x 760 mm, with fittings, inline filter to V1, for Waters 2690/2690D/2695/2695D, similar to Waters WAT270975

8005-0823, Agilent tubing, SS, 1/16 in od x 0.009 in id x 10 ft, similar to Waters WAT026973

8005-0826, Agilent tubing, SS, 1/16 in od x 0.02 in id x 10 ft, similar to Waters WAT026804

8005-0822, Agilent tubing, SS, 1/16 in od x 0.04 in id x 10 ft, similar to Waters WAT026805

8005-0836, Agilent union, stainless steel, for 1/16 inch od tubing, for Waters systems

5067-6210, InfinityLab Quick Connect assembly stainless steel 0.25 x 105 mm, with female connector

5500-1258, Quick Connect capillary stainless steel 0.25 x 105 mm, with female connector

5500-1259, Quick Connect capillary stainless steel 0.25 x 150 mm

5500-1260, Quick Connect capillary stainless steel 0.25 x 400 mm

5500-1261, Quick Turn capillary stainless steel 0.25 x 105 mm with female connector

5500-1262, Quick Turn capillary stainless steel 0.25 x 150 mm

5500-1263, Quick Turn capillary stainless steel 0.25 x 400 mm

8001-0516, Agilent back-up ring, for Shimadzu LC-20AT pump ring seal

8001-0528, Agilent inlet check valve, for Shimadzu LC-10AD/AT/ATvp pumps, similar to Shimadzu 228-32166-91

8001-0535, Agilent inlet check valve, for Shimadzu LC-10ADvp pump, similar to Shimadzu 228-39093-92

8001-0511, Agilent inlet check valve, for Shimadzu LC-20AD/AB XR pumps, similar to Shimadzu 228-48249-91

8001-0531, Agilent inlet check valve, for Shimadzu LC-9A/LC-600/LC-10AD pumps, similar to Shimadzu 228-33492-91

8001-0519, Agilent inlet valve cartridge, for Shimadzu LC-2010 and LC-2010HT pumps

8001-0532, Agilent outlet check valve, for Shimadzu LC-10AD/ATvp pumps, similar to Shimadzu 228-34976-91

8001-0529, Agilent outlet check valve, for Shimadzu LC-10AT/AD/LC-600/LC-9A pumps, similar to Shimadzu 228-32531-92

8001-0506, Agilent outlet check valve, for Shimadzu LC-2010 and LC-2010HT pumps

8001-0521, Agilent outlet check valve, for Shimadzu LC-20AD/AB, LC-10ADvp, and LC-10ATvp pumps

8001-0901, Agilent performance maintenance kit, for Shimadzu LC-20AD pump.

8001-0902, Agilent performance maintenance kit, for Shimadzu LC-20AT pump

8001-0534, Agilent plunger assembly, ceramic, for Shimadzu LC-10ADvp pump, similar to Shimadzu 228-35601-91

8001-0533, Agilent plunger assembly, ceramic, for Shimadzu LC-10ATvp pump, similar to Shimadzu 228-35009-92

8001-0514, Agilent plunger assembly, sapphire, for Shimadzu LC-2010 pump

8001-0515, Agilent plunger holder, for Shimadzu LC-10ADvp and LC-20AD/ADxr/AB pumps

8001-0615, Agilent plunger rinse seal, for Shimadzu LC-10AS/10AT/10ATvp pumps, similar to Shimadzu 228-28499-00

8001-0510, Agilent plunger seal spacer, for Shimadzu LC-20AT pump

8001-0522, Agilent plunger seal, graphite fiber PTFE, for Shimadzu LC-10ATvp, LC-20AT, SIL-10ADvp, SIL-20A/AC, SIL-HT, LC-2010 A/C, and LC-2010HT pumps

8001-0502, Agilent plunger seal, graphite-filled PTFE, for Shimadzu pumps, similar to Shimadzu 228-35146-00

8001-0530, Agilent plunger seal, polyethylene, yellow, for Shimadzu LC-20AD/20AB and LC-10ADvp pumps, similar to Shimadzu 228-32628-00

8001-0527, Agilent plunger seal, polyethylene, yellow, for Shimadzu LC-7A/10AS/10AT/10ATvp pumps, similar to Shimadzu 228-21975-00

8001-0501, Agilent plunger, for Shimadzu LC-20AT pump, similar to Shimadzu 228-35009-93

8001-0512, Agilent primary inlet check valve assembly, for Shimadzu LC-20AT pump

8001-0517, Agilent rinse seal holder assembly, for Shimadzu LC-20AT pump

8001-0520, Agilent rinse seal, for Shimadzu LC-20AT pump

8001-0612, Agilent rotor seal, PEEK, high pressure valve, for Shimadzu SIL-HT, SIL-20A/AC autosamplers, similar to Shimadzu 228-41310-92, 228-40750-92

8001-0609, Agilent rotor seal, Vespel, high pressure valve, for Shimadzu LC-2010 pump

8001-0814, Agilent sample loop, stainless steel, 100 µl, for Shimadzu SIL-20A/AC

8001-0504, Agilent sapphire plunger, for Shimadzu for LC-20AD/LC-20ADXR/LC-20AB pumps, similar to Shimadzu 228-35601-93

8001-0503, Agilent sapphire plunger, for Shimadzu LC-10ADvp/LC-2010 (HT) pumps, similar to Shimadzu 228-35601-92 and 228-34498-91

8001-0704, Agilent deuterium lamp, for Shimadzu LC-2010/LC-2010HT detectors, 2000 hour, similar to Shimadzu 228-37401-00

8001-0702, Agilent deuterium lamp, for Shimadzu SPD-20A/AV and SPD10A/AV/AVvp DAD, 2000 hour, similar to Shimadzu 228-34016-02

8001-0701, Agilent deuterium lamp, for Shimadzu SPD-M10Avp/SPD-M20A DAD, 2000 hour, similar to Shimadzu 228-34016-00

8001-0705, Agilent tungsten lamp, for Shimadzu SPD-20AV/10AV/AVvp DAD, 1200 hour, similar to Shimadzu 670-14602-00

8001-0703, Agilent tungsten lamp, for Shimadzu SPD-M10Avp/M20A DAD, 1200 hour, similar to Shimadzu 228-34410-91

8001-0808, Agilent inline filter, stainless steel, for Shimadzu LC-2010/LC-20AD/AB/AT/LC-10ADvp/ATv pumps, similar to Shimadzu 228-35871-96

8001-0807, Agilent tubing, ETFE, 1.6 mm od x 0.8 mm id x 3 m, from inlet block to check valve, for Shimadzu LC-2010 HPLC system

8001-0823, Agilent tubing, FEP, 3 mm OD x 1.5 mm x 3 m, for Shimadzu LC-2010/SIL-20A/C, 1/pk

8001-0824, Agilent tubing, PEEK, 0.25 x 500 mm, for Shimadzu SPD20A/AV/M20A, 1/pk

8001-0822, Agilent tubing, SS, 1.6 mm od x 0.3 mm id x 2 m, for Shimadzu systems

8001-0818, Agilent tubing, SS, 1.6 mm od x 0.3 mm id x 600 mm, for Shimadzu SIL-10ADvp, SiL-20A, SIL-20AC pumps

8001-0821, Agilent tubing, SS, 1.6 mm od x 0.8 mm id x 2 m, for Shimadzu LC-20AP pump

8001-0816, Agilent ferrule, stainless steel, 1.6 F (1.6 mm female), for Shimadzu LC-20AT and LC-20AD pumps

8001-0819, Agilent male nut, PEEK, 1.6 MN, for plumbing line inlet block to check valve, for Shimadzu LC-10ADvp/LC-2010 and LC-20AD/AB pumps

8001-0817, Agilent male nut, PEEK, fingertight, for 1/16 inch tubing in Shimadzu systems

8001-0805, Agilent male nut, stainless steel, 1.6 MN for 1/16 in tubing, for Shimadzu SIL-20A/AC, LC-20AT, LC-20AD pumps

8001-0806, Agilent male nut, stainless steel, 1.6 MN, W6 (taller hex portion), for Shimadzu SIL-10ADvp, SIL-20A/AC pumps

8001-0813, Agilent nut, M6, flangless, for Shimadzu LC-2010 HPLC system

8001-0614, Agilent O-ring for drain valve, perfluoroelastomer, for Shimadzu LC-10ADvp/LC-10ATvp/SIL-10ADvp/LC-20AT/LC-2010HT, 1/pk

8001-0601, Agilent rotor seal, 6-port valve, for Shimadzu SIL-10A/10Ai/10Ax autosamplers, similar to Shimadzu 228-21217-91

8001-0603, Agilent rotor seal, 6-port, for Shimadzu SIL-10ADvp autosampler, similar to Shimadzu 228-21217-97

8001-0608, Agilent rotor seal, PEEK, for low pressure valve, for Shimadzu LC-2010(HT)/SIL-20A/SIL-HT, similar to Shimadzu 228-36923-00

8001-0612, Agilent rotor seal, PEEK, high pressure valve, for Shimadzu SIL-HT, SIL-20A/AC autosamplers, similar to Shimadzu 228-41310-92, 228-40750-92

8001-0609, Agilent rotor seal, Vespel, high pressure valve, for Shimadzu LC-2010 pump

8001-0809, Agilent sample loop, stainless steel, 100 µL, for Shimadzu LC-2010, LC-2010HT, SIL-HT pumps

8001-0814, Agilent sample loop, stainless steel, 100 µl, for Shimadzu SIL-20A/AC

8002-0806, Agilent filter frit, titanium, 2 µm, for inline filter in Thermo LPG-3400BM and DGP-3600BM pumps, similar to Dionex 6268.0036

8002-0517, Agilent check valve cartridge, ceramic, for Dionex UltiMate 3000 RS pumps, optional for UltiMate 3000 SD/BM pumps

8002-0516, Agilent check valve cartridge, sapphire, biocompatible, for Dionex UltiMate pumps

8002-0912, Agilent performance maintenance kit, for Dionex UltiMate 3000 DGP-3600RS pump

8002-0913, Agilent performance maintenance kit, for Dionex UltiMate 3000 HPG-3x00RS pump

8002-0910, Agilent performance maintenance kit, for Dionex UltiMate 3000 HPG-3x00SD pump

8002-0911, Agilent performance maintenance kit, for Dionex UltiMate 3000 LPG-3400RS pump

8002-0908, Agilent performance maintenance kit, for Dionex UltiMate 3000 LPG-3400SD pump

8002-0501, Agilent piston seal support ring, for Dionex UltiMate pumps, 2/pk

8002-0502, Agilent piston seal, reversed-phase, for Thermo UltiMate 3000 RS and SD pump series, 2/pk

8002-0924, Agilent piston seal/support ring kit, normal phase, for Thermo UltiMate pumps

8002-0923, Agilent piston seal/support ring kit, reversed-phase, Thermo UltiMate pumps

8002-0601, Agilent ring seal, DR-8, PTFE, for Dionex UltiMate 3000 series pumps, 10/pk

8002-0515, Agilent sapphire piston, for Dionex UltiMate pumps

8002-0916, Agilent tubing kit, for rear seal wash system, for Dionex UltiMate 3000 pumps

8002-0819, Agilent capillary, flexible SS, 0.13 x 150 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2315

8002-0820, Agilent capillary, flexible SS, 0.13 x 250 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2325

8002-0821, Agilent capillary, flexible SS, 0.13 x 350 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2335

8002-0822, Agilent capillary, flexible SS, 0.13 x 450 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2345

8002-0818, Agilent capillary, flexible SS, 0.13 x 550 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2305

8002-0826, Agilent capillary, flexible SS, 0.18 x 250 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2385

8002-0825, Agilent capillary, flexible SS, 0.18 x 350 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2375

8002-0824, Agilent capillary, flexible SS, 0.18 x 450 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2365

8002-0823, Agilent capillary, flexible SS, 0.18 x 550 mm, with fittings, for Dionex UltiMate 3000 systems, similar to Dionex 6040.2355

8002-0809, Agilent needle seat tubing, SS, 0.8 od x 0.18 id x 120 mm, 3.1 µL, with fittings, for Dionex UltiMate 3000 WPS-3000SL pump

8002-0803, Agilent PharMed biocompatible tubing, 1.6 mm id x 180 mm, for Dionex LPG-3x00 peristaltic pumps

8002-0701, Agilent deuterium lamp, for Dionex 160/320 and 170/340 UV detectors, 2000 hour, similar to Dionex 5053.1204

8002-0704, Agilent deuterium lamp, for Dionex PDA-100 and AD25 detectors, 2000 hour

8002-0702, Agilent long-life deuterium lamp, for Dionex UVD-3000, similar to Dionex 6073.2070

8002-0706, Obsolete. No replacement recommendation

8002-0802, Agilent blind nut, PEEK, FS-8, biocompatible, for Dionex, similar to Dionex 6000.0144 and 6000.0044

8002-0921, Agilent fitting kit, for Dionex WPS-3000(T)SL, WPS-3000(T)SL Semiprep, WPS-3000(T)RS pumps

8002-0922, Agilent 250 µL injection volume kit, for Dionex WPS-3000SL analytical and WPS-3000RS autosamplers

8002-0860, Agilent buffer loop, 100 µL, SS, 1.6 od x 0.5 id x 520 mm, with fittings, for Dionex WPS-3000SL and WPS-3000RS pumps

8002-0517, Agilent check valve cartridge, ceramic, for Dionex UltiMate 3000 RS pumps, optional for UltiMate 3000 SD/BM pumps

8002-0601, Agilent ring seal, DR-8, PTFE, for Dionex UltiMate 3000 series pumps, 10/pk

8002-0602, Agilent rotor seal, Vespel, for Dionex Rheodyne 7010/7000/7040 valves, similar to Dionex 709.7010.039

8002-0807, Agilent sample loop, stainless steel, 100 µl, for Dionex WPS-3000SL/RS Analytical autosamplers

858750-913, AdvanceBio Amide HILIC column, 2.1x100mm, 1.8µm

859750-913, AdvanceBio Amide HILIC column, 2.1x150mm, 1.8µm

G3912-00000, AdvanceBio Ammonium Formate Mobile Phase

685775-913, AdvanceBio Glycan Mapping 120Å, 2.1 x 100 mm, 2.7 µm

683775-913, AdvanceBio Glycan Mapping 120Å, 2.1 x 150 mm, 2.7 µm

651750-913, AdvanceBio Glycan Mapping 120Å, 2.1 x 250 mm, 2.7 µm

821725-906, AdvanceBio Glycan Mapping 120Å, 2.1 x 5 mm, 2.7 µm, guard, 3/pk

685975-913, AdvanceBio Glycan Mapping 120Å, 4.6 x 100 mm, 2.7 µm

683975-913, AdvanceBio Glycan Mapping 120Å, 4.6 x 150 mm, 2.7 µm

680975-913, AdvanceBio Glycan Mapping 120Å, 4.6 x 250 mm, 2.7 µm

820750-905, AdvanceBio Glycan Mapping 120Å, 4.6 x 5 mm, 2.7 µm, guard, 3/pk

858700-913, AdvanceBio Glycan Mapping 300Å, 2.1 x 100 mm, 1.8 µm

859700-913, AdvanceBio Glycan Mapping 300Å, 2.1 x 150 mm, 1.8 µm

821725-905, AdvanceBio Glycan Mapping 300Å, 2.1 x 5 mm, 1.8 µm, guard, 3/pk

GKE-5008, AdvanceBio Endo F2, recombinant

GKE-5002, AdvanceBio Endoglycosidase H

GKE-5006A, AdvanceBio N-Glycanase (PNGase F), ≥2.5 U/mL

GKE-5006D, AdvanceBio N-Glycanase (PNGase F), ≥2.5 U/mL

GKE-5006B, AdvanceBio N-Glycanase (PNGase F), ≥2.5 U/mL

GKE-5006A-05, AdvanceBio N-Glycanase (PNGase F), ≥2.5 U/mL

GKE-5006B-1, AdvanceBio N-Glycanase (PNGase F), ≥2.5 U/mL

GKE-5016D, AdvanceBio N-Glycanase (PNGase F, EDTA free), ≥2.5 U/mL

GKE-5016B-1, AdvanceBio N-Glycanase (PNGase F, EDTA free), ≥2.5 U/mL

GKE-5016B, AdvanceBio N-Glycanase (PNGase F, EDTA free), ≥2.5 U/mL

GKE-5016A, AdvanceBio N-Glycanase (PNGase F, EDTA free), ≥2.5 U/mL

GKE-5016A-05, AdvanceBio N-Glycanase (PNGase F, EDTA free), ≥2.5 U/mL

GKE-5010B-2, AdvanceBio N-Glycanase-plus (PNGase F), ≥10 U/mL

GKE-5010D, AdvanceBio N-Glycanase-plus (PNGase F), ≥10 U/mL

GKE-5010B, AdvanceBio N-Glycanase-plus (PNGase F), ≥10 U/mL

GKE-5020D, AdvanceBio N-Glycanase-ultra (PNGase F, EDTA free), ≥10 U/mL

GKE-5020D-10, AdvanceBio N-Glycanase-ultra (PNGase F, EDTA free), ≥10 U/mL

GKE-5020B-5, AdvanceBio N-Glycanase-ultra (PNGase F, EDTA free), ≥10 U/mL

GKE-5020B, AdvanceBio N-Glycanase-ultra (PNGase F, EDTA free), ≥10 U/mL

GK80090, AdvanceBio O-Glycanase

GKE-5011B, AdvanceBio PNGase A (almond), 10 mU

GKE-5011A, AdvanceBio PNGase A (almond), 2 mU

GK80110, Enzymatic deglycosylation kit for N-linked and simple O-linked glycans

GK80115, Extender kit for complex O-linked glycans

WS0278-GP, N-glycanase, for GlykoPrep-plus, 700 μL

GKE-5003, PNGase F, Chryseobacterium, native

GK80075, α(1-2)-Mannosidase, Recombinant

GKX-5010-50, α(1-2,3,6)-Mannosidase

GKX-5010, α(1-2,3,6)-Mannosidase (jack bean)

GKX-5007, α(1-3,4,6)-Galactosidase (coffee bean)

GKX-5013, β(1-3,4)-Galactosidase (bovine testis)

GKX-5014, β(1-4)-Galactosidase (streptococcus pneumoniae)

GKX-5012, β(1-4,6)-Galactosidase (jack bean)

GKX-5023, β-(1-2,3,4,6)-Hexosaminidase, sequencing-grade (jack bean)

GKX-5003, β-N-Acetylhexosaminidase (jack bean)

GK80085, AdvanceBio α(1-3,4,6)-Galactosidase, Recombinant

GK80080, AdvanceBio β(1-4)-Galactosidase, Recombinant

GK80050, AdvanceBio β-N-acetylhexosaminidase

GK80040, AdvanceBio Sialidase A, 1 U

GK80045, AdvanceBio Sialidase A, 51 kDa

GK80046, AdvanceBio Sialidase A, 66 kDa

GK80043, AdvanceBio Sialidase A, Sampler Kit

GK80030, AdvanceBio Sialidase C, 1 U

GK80021, AdvanceBio Sialidase S, His-tagged

GK80060, AdvanceBio Sialidase V, Recombinant

GKSA-307, AdvanceBio 2-AA A3 N-glycan Standard

GKSA-308, AdvanceBio 2-AA A3G3 N-glycan Standard

GKSA-309, AdvanceBio 2-AA A4 N-glycan Standard

GKSA-002, AdvanceBio 2-AA Bovine Fetuin N-glycan Library

GKSA-301, AdvanceBio 2-AA G0 / A2 N-glycan Standard

GKSA-302, AdvanceBio 2-AA G0F / FA2 N-glycan Standard

GKSA-316, AdvanceBio 2-AA G1F / FA2G1 N-glycan Standard

GKSA-304, AdvanceBio 2-AA G2 / A2G2 N-glycan Standard

GKSA-305, AdvanceBio 2-AA G2F / FA2G2 N-glycan Standard

GKSA-315, AdvanceBio 2-AA G2FS1 α(2,6) / FA2G2S(6)1 N-glycan Standard

GKSA-313, AdvanceBio 2-AA G2FS2 α(2,6) / FA2G2S(6)2 N-glycan standard (formerly ProZyme)

GKSA-311, AdvanceBio 2-AA G2S1 α(2,6) / A2G2S(6)1 N-glycan standard (formerly ProZyme)

GKSA-312, AdvanceBio 2-AA G2S2 α(2,6) / A2G2S(6)2 N-glycan standard (formerly ProZyme)

GKSA-310, AdvanceBio 2-AA G4 / A4G4 N-glycan standard (formerly ProZyme)

GKSA-503, AdvanceBio 2-AA Glucose homopolymer standard (formerly ProZyme)

GKSA-001, AdvanceBio 2-AA Human α-1-acid glycoprotein N-glycan library (formerly ProZyme)

GKSA-005, AdvanceBio 2-AA Human IgG N-glycan library

GKSA-102, AdvanceBio 2-AA Man3F / FM3 N-glycan standard (formerly ProZyme).

GKSA-103, AdvanceBio 2-AA Man5 / M5 N-glycan standard (formerly ProZyme)

GKSA-104, AdvanceBio 2-AA Man6 / M6 N-glycan standard (formerly ProZyme).

GKSA-105, AdvanceBio 2-AA Man7 / M7 N-glycan standard (formerly ProZyme)

GKSA-106, AdvanceBio 2-AA Man8 / M8 N-glycan standard (formerly ProZyme)

GKSA-107, AdvanceBio 2-AA Man9 / M9 N-glycan standard (formerly ProZyme)

GKSB-232, AdvanceBio 2-AB α(2,3) Sialylated biantennary N-glycan Library

GKSB-234, AdvanceBio 2-AB α(2,3) Sialylated tetraantennary N-glycan Library

GKSB-233, AdvanceBio 2-AB α(2,3) Sialylated triantennary N-glycan Library

GKSB-262, AdvanceBio 2-AB α(2,6) Sialylated Biantennary N-glycan Library

GKSB-264, AdvanceBio 2-AB α(2,6) Sialylated tetraantennary N-glycan Library

GKSB-263, AdvanceBio 2-AB α(2,6) Sialylated triantennary N-glycan Library

GKSB-203, AdvanceBio 2-AB 3'-Sialyl-N-acetyllactosamine (3'-SLN)

GKSB-307, AdvanceBio 2-AB A3 N-glycan Standard

GKSB-309, AdvanceBio 2-AB A4 N-glycan Standard

GKSB-520, AdvanceBio 2-AB Biantennary and High Manose Partitioned Library

GKSB-002, AdvanceBio 2-AB Bovine Fetuin N-glycan Library

GKSB-100, AdvanceBio 2-AB Chitobiose (NN) N-glycan Standard

GKSB-301, AdvanceBio 2-AB G0 / A2 N-glycan Standard

GKSB-401, AdvanceBio 2-AB G0-N / A1 N-glycan Standard

GKSB-302, AdvanceBio 2-AB G0F / FA2 N-glycan Standard

GKSB-402, AdvanceBio 2-AB G0F-N / FA1 N-glycan Standard

GKSB-303, AdvanceBio 2-AB G0FB / FA2B N-glycan Standard

GKSB-317, AdvanceBio 2-AB G1 / A2G1 N-glycan Standard

GKSB-316, AdvanceBio 2-AB G1F / FA2G1 N-glycan Standard

GKSB-304, AdvanceBio 2-AB G2 / A2G2 N-glycan Standard

GKSB-305, AdvanceBio 2-AB G2F / FA2G2 N-glycan Standard

GKSB-306, AdvanceBio 2-AB G2FB / FA2BG2 N-glycan Standard

GKSB-318, AdvanceBio 2-AB G2FGa2 / FA2G2Ga(3)2 N-glycan Standard

GKSB-315, AdvanceBio 2-AB G2FS1 α(2,6) / FA2G2S(6)1 N-glycan Standard

GKSB-313, AdvanceBio 2-AB G2FS2 α(2,6) / FA2G2S(6)2 N-glycan Standard

GKSB-311, AdvanceBio 2-AB G2S1 α(2,6) / A2G2S(6)1 N-glycan Standard

GKSB-312, AdvanceBio 2-AB G2S2 α(2,6) / A2G2S(6)2 N-glycan Standard

GKSB-308, AdvanceBio 2-AB G3 / A3G3 N-glycan Standard

GKSB-314, AdvanceBio 2-AB G3S3 α(2,6) / A3G3S(6)3 N-glycan Standard

GKSB-310, AdvanceBio 2-AB G4 / A4G4 N-glycan Standard

GKSB-503, AdvanceBio 2-AB Glucose Homopolymer Standard

GKSB-001, AdvanceBio 2-AB Human α-1-acid glycoprotein N-glycan Library

GKSB-005, AdvanceBio 2-AB Human IgG N-glycan Library

GKSB-111, AdvanceBio 2-AB HYBR / M5A1B N-glycan Standard

GKSB-101, AdvanceBio 2-AB Man3 / M3 N-glycan Standard

GKSB-102, AdvanceBio 2-AB Man3F / FM3 N-glycan Standard

GKSB-103, AdvanceBio 2-AB Man5 / M5 N-glycan Standard

GKSB-104, AdvanceBio 2-AB Man6 / M6 N-glycan Standard

GKSB-105, AdvanceBio 2-AB Man7 / M7 N-glycan Standard

GKSB-106, AdvanceBio 2-AB Man8 / M8 N-glycan Standard

GKSB-107, AdvanceBio 2-AB Man9 / M9 N-glycan Standard

GKSB-965, AdvanceBio 2-AB Verification Standard

GKSB-201, AdvanceBio 2-AB GalGalNAc O-glycan Standard

GKSP-232, AdvanceBio APTS α(2,3) Sialylated biantennary N-glycan Library

GKSP-233, AdvanceBio APTS α(2,3) Sialylated triantennary N-glycan Library

GKSP-262, AdvanceBio APTS α(2,6) Sialylated biantennary N-glycan Library

GKSP-264, AdvanceBio APTS α(2,6) Sialylated tetraantennary N-glycan Library

GKSP-263, AdvanceBio APTS α(2,6) Sialylated triantennary N-glycan Library

GKSP-520, AdvanceBio APTS Biantennary and high Mannose partitioned library (formerly ProZyme)

GKSP-500, AdvanceBio APTS Bracketing standard, DP2 and DP15

GKSP-301, AdvanceBio APTS G0 / A2 N-glycan Standard

GKSP-401, AdvanceBio APTS G0-N / A1 N-glycan Standard

GKSP-302, AdvanceBio APTS G0F / FA2 N-glycan Standard

GKSP-402, AdvanceBio APTS G0F-N / FA1 N-glycan Standard

GKSP-317, AdvanceBio APTS G1 / A2G1 N-Glycan Standard

GKSP-316, AdvanceBio APTS G1F / FA2G1 N-glycan Standard

GKSP-304, AdvanceBio APTS G2 / A2G2 N-glycan Standard

GKSP-305, AdvanceBio APTS G2F / FA2G2 N-glycan Standard

GKSP-318, AdvanceBio APTS G2FGa2 / FA2G2Ga(3)2 N-glycan Standard

GKSP-315, AdvanceBio APTS G2FS1 α(2,6) / FA2G2S(6)1 N-glycan Standard

GKSP-313, AdvanceBio APTS G2FS2 α(2,6) / FA2G2S(6)2 N-glycan Standard

GKSP-311, AdvanceBio APTS G2S1 α(2,6) / A2G2S(6)1 N-glycan Standard

GKSP-312, AdvanceBio APTS G2S2 α(2,6) / A2G2S(6)2 N-glycan Standard

GKSP-005, AdvanceBio APTS Human IgG N-glycan Library

GKSP-503, AdvanceBio APTS Maltodextrin Ladder

GKSP-103, AdvanceBio APTS Man5 / M5 N-glycan Standard

GKSP-104, AdvanceBio APTS Man6 / M6 N-glycan Standard

GKSP-105, AdvanceBio APTS Man7 / M7 N-glycan Standard

GKSP-106, AdvanceBio APTS Man8 / M8 N-glycan Standard

GKSP-107, AdvanceBio APTS Man9 / M9 N-glycan Standard

GKSP-234, AdvanceBio APTS α(2,3) Sialylated tetraantennary N-glycan library (formerly ProZyme)

GKSA-307, AdvanceBio 2-AA A3 N-glycan Standard

GKSA-308, AdvanceBio 2-AA A3G3 N-glycan Standard

GKSA-309, AdvanceBio 2-AA A4 N-glycan Standard

GKSA-002, AdvanceBio 2-AA Bovine Fetuin N-glycan Library

GKSA-301, AdvanceBio 2-AA G0 / A2 N-glycan Standard

GKSA-302, AdvanceBio 2-AA G0F / FA2 N-glycan Standard

GKSA-316, AdvanceBio 2-AA G1F / FA2G1 N-glycan Standard

GKSA-304, AdvanceBio 2-AA G2 / A2G2 N-glycan Standard

GKSA-305, AdvanceBio 2-AA G2F / FA2G2 N-glycan Standard

GKSA-315, AdvanceBio 2-AA G2FS1 α(2,6) / FA2G2S(6)1 N-glycan Standard

GKSA-313, AdvanceBio 2-AA G2FS2 α(2,6) / FA2G2S(6)2 N-glycan standard (formerly ProZyme)

GKSA-311, AdvanceBio 2-AA G2S1 α(2,6) / A2G2S(6)1 N-glycan standard (formerly ProZyme)

GKSA-312, AdvanceBio 2-AA G2S2 α(2,6) / A2G2S(6)2 N-glycan standard (formerly ProZyme)

GKSA-310, AdvanceBio 2-AA G4 / A4G4 N-glycan standard (formerly ProZyme)

GKSA-503, AdvanceBio 2-AA Glucose homopolymer standard (formerly ProZyme)

GKSA-001, AdvanceBio 2-AA Human α-1-acid glycoprotein N-glycan library (formerly ProZyme)

GKSA-005, AdvanceBio 2-AA Human IgG N-glycan library

GKSA-102, AdvanceBio 2-AA Man3F / FM3 N-glycan standard (formerly ProZyme).

GKSA-103, AdvanceBio 2-AA Man5 / M5 N-glycan standard (formerly ProZyme)

GKSA-104, AdvanceBio 2-AA Man6 / M6 N-glycan standard (formerly ProZyme).

GKSA-105, AdvanceBio 2-AA Man7 / M7 N-glycan standard (formerly ProZyme)

GKSA-106, AdvanceBio 2-AA Man8 / M8 N-glycan standard (formerly ProZyme)

GKSA-107, AdvanceBio 2-AA Man9 / M9 N-glycan standard (formerly ProZyme)

GKSB-232, AdvanceBio 2-AB α(2,3) Sialylated biantennary N-glycan Library

GKSB-234, AdvanceBio 2-AB α(2,3) Sialylated tetraantennary N-glycan Library

GKSB-233, AdvanceBio 2-AB α(2,3) Sialylated triantennary N-glycan Library

GKSB-262, AdvanceBio 2-AB α(2,6) Sialylated Biantennary N-glycan Library

GKSB-264, AdvanceBio 2-AB α(2,6) Sialylated tetraantennary N-glycan Library

GKSB-263, AdvanceBio 2-AB α(2,6) Sialylated triantennary N-glycan Library

GKSB-307, AdvanceBio 2-AB A3 N-glycan Standard

GKSB-309, AdvanceBio 2-AB A4 N-glycan Standard

GKSB-520, AdvanceBio 2-AB Biantennary and High Manose Partitioned Library

GKSB-002, AdvanceBio 2-AB Bovine Fetuin N-glycan Library

GKSB-100, AdvanceBio 2-AB Chitobiose (NN) N-glycan Standard

GKSB-301, AdvanceBio 2-AB G0 / A2 N-glycan Standard

GKSB-401, AdvanceBio 2-AB G0-N / A1 N-glycan Standard

GKSB-302, AdvanceBio 2-AB G0F / FA2 N-glycan Standard

GKSB-402, AdvanceBio 2-AB G0F-N / FA1 N-glycan Standard

GKSB-303, AdvanceBio 2-AB G0FB / FA2B N-glycan Standard

GKSB-317, AdvanceBio 2-AB G1 / A2G1 N-glycan Standard

GKSB-316, AdvanceBio 2-AB G1F / FA2G1 N-glycan Standard

GKSB-304, AdvanceBio 2-AB G2 / A2G2 N-glycan Standard

GKSB-305, AdvanceBio 2-AB G2F / FA2G2 N-glycan Standard

GKSB-306, AdvanceBio 2-AB G2FB / FA2BG2 N-glycan Standard

GKSB-318, AdvanceBio 2-AB G2FGa2 / FA2G2Ga(3)2 N-glycan Standard

GKSB-315, AdvanceBio 2-AB G2FS1 α(2,6) / FA2G2S(6)1 N-glycan Standard

GKSB-313, AdvanceBio 2-AB G2FS2 α(2,6) / FA2G2S(6)2 N-glycan Standard

GKSB-311, AdvanceBio 2-AB G2S1 α(2,6) / A2G2S(6)1 N-glycan Standard

GKSB-312, AdvanceBio 2-AB G2S2 α(2,6) / A2G2S(6)2 N-glycan Standard

GKSB-308, AdvanceBio 2-AB G3 / A3G3 N-glycan Standard

GKSB-314, AdvanceBio 2-AB G3S3 α(2,6) / A3G3S(6)3 N-glycan Standard

GKSB-310, AdvanceBio 2-AB G4 / A4G4 N-glycan Standard

GKSB-503, AdvanceBio 2-AB Glucose Homopolymer Standard

GKSB-001, AdvanceBio 2-AB Human α-1-acid glycoprotein N-glycan Library

GKSB-005, AdvanceBio 2-AB Human IgG N-glycan Library

GKSB-111, AdvanceBio 2-AB HYBR / M5A1B N-glycan Standard

GKSB-101, AdvanceBio 2-AB Man3 / M3 N-glycan Standard

GKSB-102, AdvanceBio 2-AB Man3F / FM3 N-glycan Standard

GKSB-103, AdvanceBio 2-AB Man5 / M5 N-glycan Standard

GKSB-104, AdvanceBio 2-AB Man6 / M6 N-glycan Standard

GKSB-105, AdvanceBio 2-AB Man7 / M7 N-glycan Standard

GKSB-106, AdvanceBio 2-AB Man8 / M8 N-glycan Standard

GKSB-107, AdvanceBio 2-AB Man9 / M9 N-glycan Standard

GKSB-965, AdvanceBio 2-AB Verification Standard

GKR-002001, AdvanceBio 6-α fucosyl chitobiose (N2F) N-glycan Standard

GKR-001001, AdvanceBio 6-α fucosyl-N-acetylglucosamine N-glycan

GKC-005300, AdvanceBio A3 N-glycan standard (formerly ProZyme)

GKC-006300, AdvanceBio A4 N-glycan Standard

GKSP-232, AdvanceBio APTS α(2,3) Sialylated biantennary N-glycan Library

GKSP-233, AdvanceBio APTS α(2,3) Sialylated triantennary N-glycan Library

GKSP-262, AdvanceBio APTS α(2,6) Sialylated biantennary N-glycan Library

GKSP-264, AdvanceBio APTS α(2,6) Sialylated tetraantennary N-glycan Library

GKSP-263, AdvanceBio APTS α(2,6) Sialylated triantennary N-glycan Library

GKSP-520, AdvanceBio APTS Biantennary and high Mannose partitioned library (formerly ProZyme)

GKSP-500, AdvanceBio APTS Bracketing standard, DP2 and DP15

GKSP-301, AdvanceBio APTS G0 / A2 N-glycan Standard

GKSP-401, AdvanceBio APTS G0-N / A1 N-glycan Standard

GKSP-302, AdvanceBio APTS G0F / FA2 N-glycan Standard

GKSP-402, AdvanceBio APTS G0F-N / FA1 N-glycan Standard

GKSP-317, AdvanceBio APTS G1 / A2G1 N-Glycan Standard

GKSP-316, AdvanceBio APTS G1F / FA2G1 N-glycan Standard

GKSP-304, AdvanceBio APTS G2 / A2G2 N-glycan Standard

GKSP-305, AdvanceBio APTS G2F / FA2G2 N-glycan Standard

GKSP-318, AdvanceBio APTS G2FGa2 / FA2G2Ga(3)2 N-glycan Standard

GKSP-315, AdvanceBio APTS G2FS1 α(2,6) / FA2G2S(6)1 N-glycan Standard

GKSP-313, AdvanceBio APTS G2FS2 α(2,6) / FA2G2S(6)2 N-glycan Standard

GKSP-311, AdvanceBio APTS G2S1 α(2,6) / A2G2S(6)1 N-glycan Standard

GKSP-312, AdvanceBio APTS G2S2 α(2,6) / A2G2S(6)2 N-glycan Standard

GKSP-005, AdvanceBio APTS Human IgG N-glycan Library

GKSP-503, AdvanceBio APTS Maltodextrin Ladder

GKSP-103, AdvanceBio APTS Man5 / M5 N-glycan Standard

GKSP-104, AdvanceBio APTS Man6 / M6 N-glycan Standard

GKSP-105, AdvanceBio APTS Man7 / M7 N-glycan Standard

GKSP-106, AdvanceBio APTS Man8 / M8 N-glycan Standard

GKSP-107, AdvanceBio APTS Man9 / M9 N-glycan Standard

GKSP-234, AdvanceBio APTS α(2,3) Sialylated tetraantennary N-glycan library (formerly ProZyme)

GKLB-002, AdvanceBio Bovine fetuin N-glycan Library

GKR-002000, AdvanceBio Chitobiose (NN) N-glycan Standard

GKC-004300, AdvanceBio G0 / A2 N-glycan Standard

GKC-004301, AdvanceBio G0F / FA2 N-glycan Standard

GKC-004311, AdvanceBio G0FB / FA2B N-glycan Standard

GKC-014300, AdvanceBio G1 / A2G1 N-glycan Standard

GKC-014301, AdvanceBio G1F / FA2G1 N-glycan Standard

GKC-024300, AdvanceBio G2 / A2G2 N-glycan Standard

GKC-024301, AdvanceBio G2F / FA2G2 N-glycan Standard

GKC-024311, AdvanceBio G2FB / FA2BG2 N-glycan Standard

GKC-124301, AdvanceBio G2FS1 α(2,6) / FA2G2S(6)1 N-glycan standard (formerly ProZyme)

GKC-224301, AdvanceBio G2FS2 α(2,6) / FA2G2S(6)2 N-glycan Standard

GKC-124300, AdvanceBio G2S1 α(2,6) / A2G2S(6)1 N-glycan Standard

GKC-224300, AdvanceBio G2S2 α(2,6) / A2G2S(6)2 N-glycan Standard

GKC-035300, AdvanceBio G3 / A3G3 N-glycan Standard

GKC-335300, AdvanceBio G3S3 α(2,6) / A3G3S(6)3 N-glycan Standard

GKC-046300, AdvanceBio G4 / A4G4 N-glycan Standard

GKI-4503, AdvanceBio Glucose Homopolymer Standard

GKLB-001, AdvanceBio Human α-1-acid glycoprotein N-glycan Library

GKLB-005, AdvanceBio Human IgG N-glycan Library

GKIB-232, AdvanceBio IAB α(2,3) Sialylated biantennary N-glycan Library

GKIB-234, AdvanceBio IAB α(2,3) Sialylated tetraantennary N-glycan Library

GKIB-233, AdvanceBio IAB α(2,3) Sialylated triantennary N-glycan Library

GKIB-307, AdvanceBio InstantAB A3 N-glycan Standard

GKIB-309, AdvanceBio InstantAB A4 N-glycan Standard

GKIB-520, AdvanceBio InstantAB Biantennary & High Mannose Partitioned Library

GKIB-002, AdvanceBio InstantAB Bovine fetuin N-glycan Library

GKIB-301, AdvanceBio InstantAB G0 / A2 N-glycan Standard

GKIB-302, AdvanceBio InstantAB G0F / FA2 N-glycan Standard

GKIB-317, AdvanceBio InstantAB G1 / A2G1 N-glycan Standard

GKIB-316, AdvanceBio InstantAB G1F / FA2G1 N-glycan Standard

GKIB-304, AdvanceBio InstantAB G2 / A2G2 N-glycan Standard

GKIB-305, AdvanceBio InstantAB G2F / FA2G2 N-glycan Standard

GKIB-315, AdvanceBio InstantAB G2FS1 α(2,6) / FA2G2S(6)1 N-glycan Standard

GKIB-313, AdvanceBio InstantAB G2FS2 α(2,6) / FA2G2S(6)2 N-glycan Standard

GKIB-311, AdvanceBio InstantAB G2S1 α(2,6) / A2G2S(6)1 N-glycan Standard

GKIB-312, AdvanceBio InstantAB G2S2 α(2,6) / A2G2S(6)2 N-glycan Standard

GKIB-308, AdvanceBio InstantAB G3 / A3G3 N-glycan Standard

GKIB-310, AdvanceBio InstantAB G4 / A4G4 N-glycan Standard

GKIB-503, AdvanceBio InstantAB Glucose Homopolymer Standard

GKIB-965, AdvanceBio InstantAB GlykoPrep Verification Standard

GKIB-025, AdvanceBio InstantAB HuIgG and RNase B N-glycan Library

GKIB-001, AdvanceBio InstantAB Human α-1-acid glycoprotein N-glycan Library

GKIB-005, AdvanceBio InstantAB Human IgG N-glycan Library

GKIB-101, AdvanceBio InstantAB Man3 / M3 N-glycan Standard

GKIB-102, AdvanceBio InstantAB Man3F / FM3 N-glycan Standard

GKIB-103, AdvanceBio InstantAB Man5 / M5 N-glycan Standard

GKIB-104, AdvanceBio InstantAB Man6 / M6 N-glycan Standard

GKIB-105, AdvanceBio InstantAB Man7 / M7 N-glycan Standard

GKIB-106, AdvanceBio InstantAB Man8 / M8 N-glycan Standard

GKIB-107, AdvanceBio InstantAB Man9 / M9 N-glycan Standard

GKIB-009, AdvanceBio InstantAB RNase B N-glycan Library

GKPC-264, AdvanceBio InstantPC α(2,6) Sialylated tetraantennary N-glycan library

GKPC-020, AdvanceBio InstantPC CHO mAb N-glycan library (formerly ProZyme)

GKPC-020-P, AdvanceBio InstantPC CHO mAb N-glycan library plus CHO mAb glycoprotein (formerly ProZyme)

GKPC-301, AdvanceBio InstantPC G0 / A2 N-glycan standard

GKPC-401, AdvanceBio InstantPC G0-N / A1 N-glycan standard

GKPC-302, AdvanceBio InstantPC G0F / FA2 N-glycan standard

GKPC-402, AdvanceBio InstantPC G0F-N / FA1 N-glycan standard

GKPC-317, AdvanceBio InstantPC G1 / A2G1 N-glycan standard

GKPC-316, AdvanceBio InstantPC G1F / FA2G1 N-glycan standard

GKPC-403, AdvanceBio InstantPC G1FGa1 / FA2G1Ga(3)1 N-glycan standard (formerly ProZyme)

GKPC-330, AdvanceBio InstantPC G1FS1 α(2,3) / FA2G1S(3)1 N-glycan standard

GKPC-320, AdvanceBio InstantPC G1FS1 α(2,6) / FA2G1S(6)1 N-glycan standard

GKPC-329, AdvanceBio InstantPC G1S1 α(2,3) / A2G1S(3)1 N-glycan standard

GKPC-319, AdvanceBio InstantPC G1S1 α(2,6) / A2G1S(6)1 N-glycan standard

GKPC-304, AdvanceBio InstantPC G2 / A2G2 N-glycan standard

GKPC-305, AdvanceBio InstantPC G2F / FA2G2 N-glycan standard

GKPC-404, AdvanceBio InstantPC G2FGa1 / FA2G2Ga(3)1 N-glycan standard (formerly ProZyme)

GKPC-318, AdvanceBio InstantPC G2FGa2 / FA2G2Ga(3)2 N-glycan standard

GKPC-325, AdvanceBio InstantPC G2FS1 α(2,3) / FA2G2S(3)1 N-glycan standard

GKPC-315, AdvanceBio InstantPC G2FS1 α(2,6) / FA2G2S(6)1 N-glycan standard

GKPC-323, AdvanceBio InstantPC G2FS2 α(2,3) / FA2G2S(3)2 N-glycan standard

GKPC-313, AdvanceBio InstantPC G2FS2 α(2,6) / FA2G2S(6)2 N-glycan standard

GKPC-321, AdvanceBio InstantPC G2S1 α(2,3) / A2G2S(3)1 N-glycan standard

GKPC-311, AdvanceBio InstantPC G2S1 α(2,6) / A2G2S(6)1 N-glycan standard

GKPC-322, AdvanceBio InstantPC G2S2 α(2,3) / A2G2S(3)2 N-glycan standard

GKPC-312, AdvanceBio InstantPC G2S2 α(2,6) / A2G2S(6)2 N-glycan standard

GKPC-005, AdvanceBio InstantPC Human IgG N-glycan library

GKPC-503, AdvanceBio InstantPC Maltodextrin ladder

GKPC-103, AdvanceBio InstantPC Man5 / M5 N-glycan standard

GKPC-104, AdvanceBio InstantPC Man6 / M6 N-glycan standard

GKPC-105, AdvanceBio InstantPC Man7 / M7 N-glycan standard

GKPC-106, AdvanceBio InstantPC Man8 / M8 N-glycan standard

GKPC-107, AdvanceBio InstantPC Man9 / M9 N-glycan standard

GKPC-234, AdvanceBio IPC α(2,3) Sialylated tetraantennary N-glycan library

GKPC-233, AdvanceBio IPC α(2,3) Sialylated triantennary N-glycan library

GKPC-263, AdvanceBio IPC α(2,6) Sialylated triantennary N-glycan library

GKR-002100, AdvanceBio Man1 / M1 N-glycan Standard

GKR-002101, AdvanceBio Man1F / FM1 N-glycan Standard

GKR-002300, AdvanceBio Man3 / M3 N-glycan Standard

GKR-002301, AdvanceBio Man3F / FM3 N-glycan Standard

GKM-002500, AdvanceBio Man5 / M5 N-glycan Standard

GKM-002600, AdvanceBio Man6 / M6 N-glycan Standard

GKM-002700, AdvanceBio Man7 / M7 N-glycan Standard

GKM-002800, AdvanceBio Man8 / M8 N-glycan Standard

GKM-002900, AdvanceBio Man9 / M9 N-glycan Standard

GKIB-232, AdvanceBio IAB α(2,3) Sialylated biantennary N-glycan Library

GKIB-234, AdvanceBio IAB α(2,3) Sialylated tetraantennary N-glycan Library

GKIB-233, AdvanceBio IAB α(2,3) Sialylated triantennary N-glycan Library

GKIB-307, AdvanceBio InstantAB A3 N-glycan Standard

GKIB-309, AdvanceBio InstantAB A4 N-glycan Standard

GKIB-520, AdvanceBio InstantAB Biantennary & High Mannose Partitioned Library

GKIB-002, AdvanceBio InstantAB Bovine fetuin N-glycan Library

GKIB-301, AdvanceBio InstantAB G0 / A2 N-glycan Standard

GKIB-302, AdvanceBio InstantAB G0F / FA2 N-glycan Standard

GKIB-317, AdvanceBio InstantAB G1 / A2G1 N-glycan Standard

GKIB-316, AdvanceBio InstantAB G1F / FA2G1 N-glycan Standard

GKIB-304, AdvanceBio InstantAB G2 / A2G2 N-glycan Standard

GKIB-305, AdvanceBio InstantAB G2F / FA2G2 N-glycan Standard

GKIB-315, AdvanceBio InstantAB G2FS1 α(2,6) / FA2G2S(6)1 N-glycan Standard

GKIB-313, AdvanceBio InstantAB G2FS2 α(2,6) / FA2G2S(6)2 N-glycan Standard

GKIB-311, AdvanceBio InstantAB G2S1 α(2,6) / A2G2S(6)1 N-glycan Standard

GKIB-312, AdvanceBio InstantAB G2S2 α(2,6) / A2G2S(6)2 N-glycan Standard

GKIB-308, AdvanceBio InstantAB G3 / A3G3 N-glycan Standard

GKIB-310, AdvanceBio InstantAB G4 / A4G4 N-glycan Standard

GKIB-503, AdvanceBio InstantAB Glucose Homopolymer Standard

GKIB-965, AdvanceBio InstantAB GlykoPrep Verification Standard

GKIB-025, AdvanceBio InstantAB HuIgG and RNase B N-glycan Library

GKIB-001, AdvanceBio InstantAB Human α-1-acid glycoprotein N-glycan Library

GKIB-005, AdvanceBio InstantAB Human IgG N-glycan Library

GKIB-101, AdvanceBio InstantAB Man3 / M3 N-glycan Standard

GKIB-102, AdvanceBio InstantAB Man3F / FM3 N-glycan Standard

GKIB-103, AdvanceBio InstantAB Man5 / M5 N-glycan Standard

GKIB-104, AdvanceBio InstantAB Man6 / M6 N-glycan Standard

GKIB-105, AdvanceBio InstantAB Man7 / M7 N-glycan Standard

GKIB-106, AdvanceBio InstantAB Man8 / M8 N-glycan Standard

GKIB-107, AdvanceBio InstantAB Man9 / M9 N-glycan Standard

GKIB-009, AdvanceBio InstantAB RNase B N-glycan Library

GKPC-264, AdvanceBio InstantPC α(2,6) Sialylated tetraantennary N-glycan library

GKPC-020, AdvanceBio InstantPC CHO mAb N-glycan library (formerly ProZyme)

GKPC-020-P, AdvanceBio InstantPC CHO mAb N-glycan library plus CHO mAb glycoprotein (formerly ProZyme)

GKPC-301, AdvanceBio InstantPC G0 / A2 N-glycan standard

GKPC-401, AdvanceBio InstantPC G0-N / A1 N-glycan standard

GKPC-302, AdvanceBio InstantPC G0F / FA2 N-glycan standard

GKPC-402, AdvanceBio InstantPC G0F-N / FA1 N-glycan standard

GKPC-317, AdvanceBio InstantPC G1 / A2G1 N-glycan standard

GKPC-316, AdvanceBio InstantPC G1F / FA2G1 N-glycan standard

GKPC-403, AdvanceBio InstantPC G1FGa1 / FA2G1Ga(3)1 N-glycan standard (formerly ProZyme)

GKPC-330, AdvanceBio InstantPC G1FS1 α(2,3) / FA2G1S(3)1 N-glycan standard

GKPC-320, AdvanceBio InstantPC G1FS1 α(2,6) / FA2G1S(6)1 N-glycan standard

GKPC-329, AdvanceBio InstantPC G1S1 α(2,3) / A2G1S(3)1 N-glycan standard

GKPC-319, AdvanceBio InstantPC G1S1 α(2,6) / A2G1S(6)1 N-glycan standard

GKPC-304, AdvanceBio InstantPC G2 / A2G2 N-glycan standard

GKPC-305, AdvanceBio InstantPC G2F / FA2G2 N-glycan standard

GKPC-404, AdvanceBio InstantPC G2FGa1 / FA2G2Ga(3)1 N-glycan standard (formerly ProZyme)

GKPC-318, AdvanceBio InstantPC G2FGa2 / FA2G2Ga(3)2 N-glycan standard

GKPC-325, AdvanceBio InstantPC G2FS1 α(2,3) / FA2G2S(3)1 N-glycan standard

GKPC-315, AdvanceBio InstantPC G2FS1 α(2,6) / FA2G2S(6)1 N-glycan standard

GKPC-323, AdvanceBio InstantPC G2FS2 α(2,3) / FA2G2S(3)2 N-glycan standard

GKPC-313, AdvanceBio InstantPC G2FS2 α(2,6) / FA2G2S(6)2 N-glycan standard

GKPC-321, AdvanceBio InstantPC G2S1 α(2,3) / A2G2S(3)1 N-glycan standard

GKPC-311, AdvanceBio InstantPC G2S1 α(2,6) / A2G2S(6)1 N-glycan standard

GKPC-322, AdvanceBio InstantPC G2S2 α(2,3) / A2G2S(3)2 N-glycan standard

GKPC-312, AdvanceBio InstantPC G2S2 α(2,6) / A2G2S(6)2 N-glycan standard

GKPC-005, AdvanceBio InstantPC Human IgG N-glycan library

GKPC-503, AdvanceBio InstantPC Maltodextrin ladder

GKPC-103, AdvanceBio InstantPC Man5 / M5 N-glycan standard

GKPC-104, AdvanceBio InstantPC Man6 / M6 N-glycan standard

GKPC-105, AdvanceBio InstantPC Man7 / M7 N-glycan standard

GKPC-106, AdvanceBio InstantPC Man8 / M8 N-glycan standard

GKPC-107, AdvanceBio InstantPC Man9 / M9 N-glycan standard

GKPC-234, AdvanceBio IPC α(2,3) Sialylated tetraantennary N-glycan library

GKPC-233, AdvanceBio IPC α(2,3) Sialylated triantennary N-glycan library

GKPC-263, AdvanceBio IPC α(2,6) Sialylated triantennary N-glycan library

GKR-002001, AdvanceBio 6-α fucosyl chitobiose (N2F) N-glycan Standard

GKR-001001, AdvanceBio 6-α fucosyl-N-acetylglucosamine N-glycan

GKC-005300, AdvanceBio A3 N-glycan standard (formerly ProZyme)

GKC-006300, AdvanceBio A4 N-glycan Standard

GKLB-002, AdvanceBio Bovine fetuin N-glycan Library

GKR-002000, AdvanceBio Chitobiose (NN) N-glycan Standard

GKC-004300, AdvanceBio G0 / A2 N-glycan Standard

GKC-004301, AdvanceBio G0F / FA2 N-glycan Standard

GKC-004311, AdvanceBio G0FB / FA2B N-glycan Standard

GKC-014300, AdvanceBio G1 / A2G1 N-glycan Standard

GKC-014301, AdvanceBio G1F / FA2G1 N-glycan Standard

GKC-024300, AdvanceBio G2 / A2G2 N-glycan Standard

GKC-024301, AdvanceBio G2F / FA2G2 N-glycan Standard

GKC-024311, AdvanceBio G2FB / FA2BG2 N-glycan Standard

GKC-124301, AdvanceBio G2FS1 α(2,6) / FA2G2S(6)1 N-glycan standard (formerly ProZyme)

GKC-224301, AdvanceBio G2FS2 α(2,6) / FA2G2S(6)2 N-glycan Standard

GKC-124300, AdvanceBio G2S1 α(2,6) / A2G2S(6)1 N-glycan Standard

GKC-224300, AdvanceBio G2S2 α(2,6) / A2G2S(6)2 N-glycan Standard

GKC-035300, AdvanceBio G3 / A3G3 N-glycan Standard

GKC-335300, AdvanceBio G3S3 α(2,6) / A3G3S(6)3 N-glycan Standard

GKC-046300, AdvanceBio G4 / A4G4 N-glycan Standard

GKI-4503, AdvanceBio Glucose Homopolymer Standard

GKLB-001, AdvanceBio Human α-1-acid glycoprotein N-glycan Library

GKLB-005, AdvanceBio Human IgG N-glycan Library

GKR-002100, AdvanceBio Man1 / M1 N-glycan Standard

GKR-002101, AdvanceBio Man1F / FM1 N-glycan Standard

GKR-002300, AdvanceBio Man3 / M3 N-glycan Standard

GKR-002301, AdvanceBio Man3F / FM3 N-glycan Standard

GKM-002500, AdvanceBio Man5 / M5 N-glycan Standard

GKM-002600, AdvanceBio Man6 / M6 N-glycan Standard

GKM-002700, AdvanceBio Man7 / M7 N-glycan Standard

GKM-002800, AdvanceBio Man8 / M8 N-glycan Standard

GKM-002900, AdvanceBio Man9 / M9 N-glycan Standard

GKRP-3500, AdvanceBio Monosaccharide Standard Set

GKP-020, CHO mAb Glycoprotein, 250 µg

WS0021, Fetuin control, heat-treated, sub component, 0.5 mg

K532711-8, Telomere PNA Kit/FITC for Flow Cytometry, PNA FISH Kit/FITC. Flow, Flow Cytometry, 20 tests

2030024, Decontamination kit, NovoCyte Quanteon/Advanteon/Penteon

2030015, Decontamination kit, NovoCyte V1

2030016, Decontamination kit, NovoCyte V2

2030035, 1-Year fluidics maintenance kit, V1

2030038, 1-Year fluidics maintenance kit, V2.

2030041, 1-Year fluidics maintenance kit.

2030043, 2-month fluidic maintenance kit.

2030037, 2-month fluidics maintenance kit, V1.

2030040, 2-month fluidics maintenance kit, V2.

2030042, 6-month fluidic maintenance kit.

2030036, 6-month fluidics maintenance kit, V1.

2030039, 6-month fluidics maintenance kit, V2.

2020007, Container, NovoClean solution, 500 mL

2020004, Container, NovoFlow sheath fluid, 3 L

2020006, Container, NovoRinse solution, 500 mL

2020005, Container, waste, 3 L

2030030, In-line filter, 0.05 µm, NovoFlow sheath fluid, 15/pk

2030029, In-line filter, 0.05 µm, NovoFlow sheath fluid, 5/pk

2030002, In-line filter, NovoFlow sheath fluid

2030019, In-line filter, NovoFlow sheath fluid, 12/pk

2040096, Inlet filter, 15 L NovoFlow container

2030049, Inlet filter, NovoClean solution

2030051, Inlet filter, NovoClean solution, 25/pk

2030001, Inlet filter, NovoFlow sheath fluid

2030048, Inlet filter, NovoRinse solution

2030050, Inlet filter, NovoRinse solution, 25/pk

2020008, Quick coupler & tubing kit for fluid containers

2060087, Quick coupling connecter kit

2020002, Spigot, NovoFlow sheath fluid refill

2020119, Tubing harness, 15 L NovoFlow container

2020120, Tubing harness, 15 L waste container

2030004, Tubing, sheath pump, V1 systems

2030003, Waste filter

2060163, Bandpass filter assembly 445/45 nm

2050015, Bandpass filter assembly 445/45 nm

2060121, Bandpass filter assembly 488/10 nm

2060164, Bandpass filter assembly 530/30 nm

2060120, Bandpass filter assembly 530/30 nm

2060139, Bandpass filter assembly 550/49 nm

2060165, Bandpass filter assembly 561/14 nm

2060118, Bandpass filter assembly 561/14 nm

2060119, Bandpass filter assembly 572/28 nm

2060268, Bandpass filter assembly 572/28 nm

2060166, Bandpass filter assembly 586/20 nm

2060117, Bandpass filter assembly 586/20 nm

2060138, Bandpass filter assembly 590/36 nm

2060167, Bandpass filter assembly 615/20 nm

2050011, Bandpass filter assembly 615/20 nm

2060137, Bandpass filter assembly 630/30 nm

2060091, Bandpass filter assembly 660/20 nm

2060168, Bandpass filter assembly 660/20 nm

2060269, Bandpass filter assembly 667/30 nm

2060092, Bandpass filter assembly 675/30 nm

2060089, Bandpass filter assembly 695/40 nm

2060169, Bandpass filter assembly 695/40 nm

2060116, Bandpass filter assembly 725/40 nm

2060170, Bandpass filter assembly 725/40 nm

2050018, Bandpass filter assembly 780/60 nm

2060171, Bandpass filter assembly 780/60 nm

2050012, Dichroic mirror assembly 472 nm

2060128, Dichroic mirror assembly 495 nm

2060172, Dichroic mirror assembly 495 nm (LP)

2060127, Dichroic mirror assembly 505 nm

2060267, Dichroic mirror assembly 550 nm (SP)

2060173, Dichroic mirror assembly 552 nm (LP)

2060126, Dichroic mirror assembly 555 nm

2060174, Dichroic mirror assembly 570 nm (SP)

2060125, Dichroic mirror assembly 572 nm

2060175, Dichroic mirror assembly 598 nm (SP)

2050013, Dichroic mirror assembly 600 nm (LP)

2060176, Dichroic mirror assembly 627 nm (SP)

2060124, Dichroic mirror assembly 650 nm

2060090, Dichroic mirror assembly 685 nm (LP)

2060177, Dichroic mirror assembly 685 nm (LP)

2060123, Dichroic mirror assembly 705 nm (LP)

2060178, Dichroic mirror assembly 705 nm (LP)

2050014, Dichroic mirror assembly 735 nm

2060122, Dichroic mirror assembly 757 nm (LP)

2060179, Dichroic mirror assembly 757 nm (LP)

2060180, Full reflection mirror (FRM)

2060157, Full reflection mirror (FRM)

2060187, Full reflection mirror (FRM)

8000004, NovoCyte QC particles (generation 2)

2020079, NovoSampler Pro Rack, 24-tube

2020115, NovoSampler Q 40 tube EP tube rack

2020103, NovoSampler Q Rack, 40-tube

2020101, Single tube holder, 1.5 mL Eppendorf

2020100, Tube holder, 12 x 75 mm

2020011, Tube holder, version A, 1.5 mL Eppendorf

2020010, Tube holder, version A, 12 x 75 mm

2020069, Tube holder, version B, 1.5 mL Eppendorf

2020068, Tube holder, version B, 12 x 75 mm

F711001-1, Monoclonal Mouse Anti-Human B Cell/FITC, Clone FMC7, Flow cytometry, 1 mL

F705301-1, Monoclonal Mouse Anti-Human BCL2 Oncoprotein/FITC, Clone 124, Flow cytometry, 1 mL

F082601-1, Monoclonal Mouse Anti-Human CD10/FITC, Clone SS2/36, Flow cytometry, 1 mL

R084801-1, Monoclonal Mouse Anti-Human CD10/RPE, Clone SS2/36, Flow cytometry, 1 mL

F713801-1, Monoclonal Mouse Anti-Human CD103, Mucosa Lymphocyte Antigen/FITC, Clone Ber-ACT8, Flow cytometry, 1 mL

R718801-1, Monoclonal Mouse Anti-Human CD103, Mucosa Lymphocyte Antigen/RPE, Clone Ber-ACT8, Flow cytometry, 1 mL

P510050-8, FITC/HRP, Concentrate

F026102-2, Mouse Immunoglobulins/FITC, Concentrate

X096801-1, Mouse IgG1/APC

X092701-5, Mouse IgG1/FITC

X092801-5, Mouse IgG1/RPE

X095501-5, Mouse IgG1/RPE-Cy5

X093101-2, Negative Control Mouse IgG1

X093301-1, Mouse IgG2a/FITC

X095001-1, Mouse IgG2a/RPE

X099801-1, Rabbit F(ab')2/APC

X092901-1, Rabbit F(ab')2/FITC

X093001-1, Rabbit F(ab')2/RPE

872B622C, NovoClean solution (1X, 500mL)

872B622, NovoClean solution, 1X, 500 mL

875B601C, NovoFlow sheath fluid (1X, 10L)

891B601, NovoFlow sheath fluid, 1X, 10 L

875B601, NovoFlow sheath fluid, 1X, 10 L

892B601, NovoFlow sheath fluid. For use in China only.

871B607, NovoFlow solution, 100X, 200 mL

872B607, NovoFlow solution, 100X, 500 mL

872B603, NovoRinse solution, 1X, 500 mL

872B610, NovoRinse solution, 5X, 500 mL

8100002, Starter kit, NovoCyte

8100019AA, Starter kit, NovoCyte Quanteon/Advanteon

894B604, Acealyse solution

K231111-5, IntraStain

K231111-8J, IntraStain, Fixation and Permeabilization Kit for Flow Cytometry, JP

894B605, NovoLyse solution

8940275, Permeabilization buffer

K007811-8, QIFIKIT®, Series of coated beads, Flow Cytometry, 10 calibrations

110648190, Cell base, for Cary 50/60

110716190, Cell holder base

110026900, Cell holder, cylindrical, single, ambient, allows use of cylindrical cells up to 100 mm pathlength, for all Cary models

110059900, Cell holder, rectangular, long pathlength, holds 20, 50 and 100 mm rectangular cells and rectangular flow cells, for all Cary models

110260190, Cell holder, standard, for 10 mm pathlength rectangular cells, supplied as standard with Cary 100/300 and 5000/6000

6610014000, Cell holder, variable pathlength, for rectangular cells up to 100 mm pathlength, for all Cary series, must be fitted in a solid sample holder

7910047600, Cuvette holder, center mount, clip style, for external diffuse reflectance accessory (DRA) for Agilent Cary 4000/5000/6000 UV-Vis

7910038700, Cuvette holder, center mount, for external diffuse reflectance accessory (DRA) for Cary 4000/5000/6000 UV-Vis

7910047500, Cuvette holder, center mount, jaw style, for external diffuse reflectance accessory (DRA) for Agilent Cary 4000/5000/6000 UV-Vis

7910038300, Cuvette holder, external mount, for external diffuse reflectance accessory (DRA) for Agilent Cary 4000/5000/6000 UV-Vis

89076C, Long pathlength cell holder

110645090, Micro cell holder, for Cary 50/60 only, 1/pk

08451-60104, Standard cell holder assembly for the Agilent 8454 and 8453 UV-Vis spectrophotometer

110721900, Standard cell holder, 10 mm, with z height adjustment from 0-20 mm

7910033500, Test tube holder, for using 16mm od test tubes in sample compartment instead of conventional cuvettes, for Cary 50/60 only

210125300, Variable pathlength cell holder, for rectangular cells of 5, 10, 20, 30, 40, 50 mm pathlength

5190-0530, Cell cleaning solvent for UV/VIS 1L

9300-0761, Lens cleaning paper, lint free. 50/pk

190029202, Quartz block insert, 9 x 9.5 mm

5061-3388, Spacer for 1 mm pathlength macro cell, when fitted in standard 12.5 x 12.5 mm cell holder, black anodized aluminum

5061-3389, Spacer for 2 mm pathlength macro cell, when fitted in standard 12.5 x 12.5 mm cell holder, black anodized aluminum

5061-3390, Spacer for 5 mm pathlength macro cell, when fitted in standard 12.5 x 12.5 mm cell holder, black anodized aluminum

7418000400, Magnetic stirrer bar, PTFE, star type

6610018900, Magnetic stirrer bars, 6 mm long x 3 mm diameter, PTFE-coated, 10/pk

9301-1161, Magnetic stirring bar, 7 x 3 mm, 5 mm diameter, 2/pk

110654300, Filter disk assembly, UG11GG420, red

10030100, Filter, neutral density, uncertified, nominal absorbance 0.5, 1.1, 1.5, used for rear beam attenuation with Cary 4000/5000/6000i, 3/pk

10030200, Glass filter kit, holmium oxide/didymium, used as a quick check of instrument wavelength accuracy, compatible with all standard UV systems

118020790, Holmium oxide filter

9910056100, Neutral density filter kit, for testing photometric linearity

G9820-80000, Deuterium UV lamp, replacement UV source lamp for Cary 100/300 and Cary 400/500 UV instruments

2140-0605, Lamp, deuterium, Agilent 8453 UV-Vis spectrophotometer

110713990, Lamp, deuterium, UV, for Cary 4000/5000/6000i

5610136300, Lamp, mercury, for Cary 4000/5000/6000i, for UV-Vis wavelength validation

5610013900, Lamp, visible, quartz-iodide (QI), for Cary 4000/5000/6000i

G9820-60000, Loom, deuterium lamp extension, required when installing deuterium lamp inch a Cary 1/3/100/300 series UV-Vis

G1103-60001, Tungsten VIS lamp

5610021700, Visible source lamp

110639690, Xenon lamp module, for Cary 50/60

6610020500, Cary 50 dissolution tubing spares kit

3710052000, Pump tubing for UV/Vis instruments, 3 bridged, purple/black, 12/pk

3710026400, Silicon tubing, 1 mm id, 3 mm od

2410023800, Silicone tubing, 3/16 in id x 5/16 in od, per meter, for 700 Series, Vista Series, and Liberty ICP-OES

G9853-68000, Tubing kit for Cary Sipper accessory, for the Cary 3500 UV-Vis system

3710030800, Tubing to sample, PTFE, for routine sampler accessory, per m

9910052900, Tubing, peristaltic pump kit for the Cary Routine Sampler Accessory

9910053900, Burner cleaning and alignment card, 100/pk

210164000, Burner, air-acetylene, Mark 7, compatible with Mark 7, VI and V spray chamber assemblies

210164100, Burner, nitrous oxide-acetylene, Mark 7, compatible with Mark 7, VI and V spray chamber assemblies

6910013100, O-ring Mark 7 burner base, fluorinated, solvent compatible, 1/pk

6910010500, O-ring Mark 7 burner base, nitrile, 1/pk

G8003-67001, Aqueous sample introduction kit, for Agilent MP-AES

G8003-67005, Inert sample introduction kit, for Agilent 4200 MP-AES

G8000-68004, Organics Kit for 4100 MP-AES. Adapts the 4100 MP-AES for determination of organic solvents.

G8003-67000, Sample introduction kit, high sensitivity, for routine aqueous samples with Agilent MP-AES

G8010-60346, Gas humidifier, for Nebulizer carrier gas, for 5000 Series ICP-OES and 4200 Series MP-AES

G8400-60700, Replacement Argon humidifier, two gas lines, for Agilent ICP-MS. Includes bottle, cap and membrane tube. Tubing kit (G8400-60710) and bracket for attachment to ICP-MS not included.

5190-0148, Replacement bottle, 250 mL, clear, no cap, for use with Argon humidifier

5069-4496, Replacement membrane tube, 300 mm, with female locking Luer for Argon humidifier

G8400-60710, Tubing set, for argon humidifier, for Agilent ICP-MS,ICP-OES and MP-AES

G8001-64004, Inlet air filter kit, Agilent 4107 nitrogen generator

G8000-68002, Inlet cooling air filter for the Agilent MP-AES

G8010-68023, Drain fitting, right-angle, UniFit, for waste outlet from IsoMist spray chamber, 3/pk

G8007-68000, PuraFlex transfer tube, for IsoMist used with Agilent MP-AES

G8007-68001, Spray chamber, MP-AES, twister style (double-pass) cyclonic, encapsulated, for use with IsoMist with LOL configuration

7910031300, ESD wrist strap, disposable

G8000-64112, Pre-optic window for Agilent MP-AES

G8000-70001, Replacement onboard Argon bottle

3710033400, Tubing 1/4 in id and 3/8 in od

3710037800, Tubing, Tygon, 6.4 mm id, 1.6 mm wall, spray chamber outlet to torch

G8000-63003, Accessory kit to adapt the Multimode Sample Introduction System (MSIS), for use with Agilent 5000 Series ICP-OES.

G8479-60100, MSIS drain tube assembly

G8479-20020, MSIS nebulizer bushing, with O-rings

G8479-60300, MSIS reaction cone assembly

G8479-68100, MSIS reagent tubing kit

3710068900, MSIS tubing to pump waste Aqueous PVC Peristaltic pump tubing, PVC, 2 tabs, black/white, 3.18 mm id), 12/pk

G8479-67000, O-rings for MSIS nebulizer bushing, 1 pair

3710027200, PVC peristaltic pump tubing, black/black tabs, for pumping reagents with Agilent VGA 76/77 vapor generation accessory, 12/pk

5005-0451, Cleaning wire, for V-groove inert high TDS nebulizer gas orifice, 0.3 m, 3/pk

5043-0502, Conical adapter, for 1/16 inch od sample line, of OneNeb Series 2 nebulizer

5005-0448, Gas port adaptor, for V-groove inert high TDS nebulizer, for 4100/4200 MP-AES and 700 series/legacy ICP-OES instruments.

G8000-64142, Nebulizer gas connector for Agilent MP-AES

G8003-60019, Nebulizer locking nut for Agilent inert spray chamber for ICP-OES/MP-AES and MP-AES glass spray chamber.

5005-0446, Replacement gas inlet line and fitting, for V-groove inert high TDS nebulizer, with connection for 5100/5110 and 5800/5900 ICP-OES instruments.

5005-0447, Replacement sample inlet line and fitting, for the V-groove inert, high TDS nebulizer

9910107700, Sample inlet (EzyFit) fitting for Conikal glass concentric nebulizer.

G8010-60345, Sample inlet fitting, for OneNeb Series 2 nebulizer

G8003-60031, Sample uptake capillary, for concentric nebulizer used with MP-AES

2410020500, Tubing, capillary, nebulizer, for ketone-based organic samples, per m

5005-0445, V-groove, inert high TDS nebulizer connection kit for AVS 4/6/7 switching valves, 1/pk

G8000-70004, Concentric nebulizer for Agilent MP-AES

G8010-60293, Nebulizer, flow blurring, inert OneNeb series 2 nebulizer. Recommended for high sensitivity, organic samples, high TDS samples (with particle sizes < 150 microns) and HF digests

G8020-69001, Nebulizer, high TDS, V-groove, inert, for ICP-OES and MP-AES

2010106800, Nebulizer, K-style (Conikal) concentric, glass, recommended for routine analysis of organic solvents and samples with up to 5% dissolved solids

G8014-68007, Drain connector, 10/32UNF to Luer Slip, for inert spray chamber (p/n G8014-68002)

G8003-60019, Nebulizer locking nut for Agilent inert spray chamber for ICP-OES/MP-AES and MP-AES glass spray chamber.

G8014-68005, O-ring kit for inert spray chamber (p/n G8014-68002)

G8014-20002, Replacement baffle (internal), for inert spray chamber (p/n G8014-68002)

G8010-80036, UniFit drain connector, 2.0 mm od x 0.86 mm id, for spray chamber used with Agilent 5000 Series ICP-OES, with 480 mm capillary tubing, 3/pk

G8000-70007, Double-pass glass cyclonic spray chamber for Agilent MP-AES

G8000-64143, Drain tube kit for Agilent MP-AES

G8014-68002, Inert spray chamber for Agilent 5000 series ICP-OES and MP-AES. Double pass design with removable baffle and ball joint outlet

G8000-70006, Single-pass glass cyclonic spray chamber for Agilent MP-AES

G8007-68001, Spray chamber, MP-AES, twister style (double-pass) cyclonic, encapsulated, for use with IsoMist with LOL configuration

3710031500, Tubing, 1/8 inch id, 1/4 inch od, 1/16 inch wall thickness.

G8010-60306, Autosampler connection kit for AVS switching valve

G8010-20080, Drip tray, for 4 port valve, for AVS 4 switching valve

G8010-60348, ICP-OES connection kit, autosampler to peristaltic pump

G8010-60333, Nebulizer adaptor kit, for AVS 4 switching valve

G8010-60304, Nebulizer connection kit for AVS switching valve

8003-0493, PerkinElmer, Sample inlet (UniFit) fitting, 0.75 mm id, 700 mm, for U-series concentric glass nebulizer

G8493-60002, Rotor seal, for 4 port valve, for AVS 4 switching valve

G8010-60335, Sample/Rinse connection kit, for AVS switching valve, 2/pk

G8493-60000, Spare valve, 4 port, 2 position, for AVS 4 switching valve

G8493-60003, Stator and rotor, for 4 port valve, for AVS 4 switching valve

G8010-60334, Waste tube kit, for 4 Port AVS switching valve

G8494-60004, Mounting clamp, for AVS 4/6/7 switching valve

G8494-60007, Reagent uptake capillary tube with heavy PTFE Sinker, 1/pk.

G8494-60005, Rinse (10 L) and waste (20 L) container kit for AVS 6/7

G8003-20011, Ball joint adaptor, PTFE, for Agilent 4200 MP-AES inert torch

G8010-60227, Clamp for ball joint connector between spray chamber and inert torch, for Agilent MP-AES

G8000-64140, Clamp for torch with ball joint socket used with MP-AES/ICP-OES

G8003-68003, Torch cleaning stand, for cleaning Easy-fit MP-AES torches, for 4100/4200 MP-AES

G8003-60018, Easy-fit inert torch, for Agilent 4200 MP-AES, for use with HF digests

G8000-70002, Easy-fit torch, for Agilent 4100 MP-AES

G8003-70000, Torch, easy-fit, for Agilent 4200 MP-AES only (not compatible with earlier model 4100-MP-AES), blue base for easy identification

G8010-60346, Gas humidifier, for Nebulizer carrier gas, for 5000 Series ICP-OES and 4200 Series MP-AES

G8010-60255, Nebulizer, concentric Seaspray glass nebulizer for 5000 series ICP-OES, for routine analysis of most sample types.

G8010-60293, Nebulizer, flow blurring, inert OneNeb series 2 nebulizer. Recommended for high sensitivity, organic samples, high TDS samples (with particle sizes < 150 microns) and HF digests

G8010-60270, Nebulizer, glass concentric Conikal U-series nebulizer, for routine analysis of most organic samples and samples with up to 5% TDS (without large particulates)

G8010-60347, Nebulizer, glass concentric U-series slurry nebulizer, suitable for samples with particles up to 150 μm or 20% total dissolved solids

G8020-69001, Nebulizer, high TDS, V-groove, inert, for ICP-OES and MP-AES

CP914506, Nebulizer, inert Mira Mist, PEEK, for high TDS applications for ICP-OES. Enhanced parallel path nebulizer gives high salts and TDS capability.

CP913246, Nebulizer, inert Mira Mist, PTFE, for high TDS applications for ICP-OES. Enhanced parallel path nebulizer gives high salts and TDS capability and handles aggressive acid digests

2010106800, Nebulizer, K-style (Conikal) concentric, glass, recommended for routine analysis of organic solvents and samples with up to 5% dissolved solids

2010081600, Nebulizer, K-style High flow (Conikal) concentric glass nebulizer for Liberty Series II axial systems

2010126000, Nebulizer, MicroMist low-flow concentric glass nebulizer

CP959366, Nebulizer, Seaspray concentric glass 2 mL/min at 1 L/min, includes EzyFit sample connector (0.75 mm id x 700 mm) and EzyLok gas connector

2010096400, Nebulizer, Seaspray concentric glass nebulizer for 700 and Vista Series ICP-OES

2010097700, Nebulizer, slurry, high-flow, concentric, glass, for Liberty series II axial systems

G8010-60293, Nebulizer, flow blurring, inert OneNeb series 2 nebulizer. Recommended for high sensitivity, organic samples, high TDS samples (with particle sizes < 150 microns) and HF digests

G8020-69001, Nebulizer, high TDS, V-groove, inert, for ICP-OES and MP-AES

CP913246, Nebulizer, inert Mira Mist, PTFE, for high TDS applications for ICP-OES. Enhanced parallel path nebulizer gives high salts and TDS capability and handles aggressive acid digests

G8010-60345, Sample inlet fitting, for OneNeb Series 2 nebulizer

5005-0451, Cleaning wire, for V-groove inert high TDS nebulizer gas orifice, 0.3 m, 3/pk

5043-0502, Conical adapter, for 1/16 inch od sample line, of OneNeb Series 2 nebulizer

1610085600, Connector, for nebulizer gas flow, 1/4 inch, connects to nebulizer gas outlet on Agilent ICP-OES

1610085300, Connector, for nebulizer gas flow, 1/8 inch, connects nebulizer gas outlet on Agilent ICP-OES

G3266-80015, EzyLok gas connector for carrier gas, suits most concentric nebulizers used with ICP-OES/MS

9910127800, Gas inlet connector, for concentric glass nebulizer used with ICP-OES

5005-0448, Gas port adaptor, for V-groove inert high TDS nebulizer, for 4100/4200 MP-AES and 700 series/legacy ICP-OES instruments.

1610132400, ISTD Connector, Y-piece for online addition of internal standard/ionization buffer

6910008200, Nebulizer bung O-ring kit, 7/32 inch id, 11/32 inch od

G3266-80020, Nebulizer cleaner, for glass concentric nebulizers

G3266-80017, Nebulizer gas fitting, with PEEK ratchet connector

5005-0446, Replacement gas inlet line and fitting, for V-groove inert high TDS nebulizer, with connection for 5100/5110 and 5800/5900 ICP-OES instruments.

G8010-80043, Replacement Helix locking screw for ICP spray chamber

G8010-80042, Replacement Helix seal for ICP spray chamber, 4/pk

5005-0447, Replacement sample inlet line and fitting, for the V-groove inert, high TDS nebulizer

1610136400, Sample inlet (EzyFit) fitting for concentric glass nebulizer on radial ICP-OES

9910107700, Sample inlet (EzyFit) fitting for Conikal glass concentric nebulizer.

G8010-60345, Sample inlet fitting, for OneNeb Series 2 nebulizer

CP913777, Sample inlet tubing for inert Mira Mist nebulizer used with ICP-OES/ICP-MS

G3266-80012, Sample uptake tube and connector, UniFit, 0.5 mm id, with 0.5 mm id x 700 mm capillary, for U-Series MicroMist concentric nebulizer, 10/pk

810103200, Speedy clamp, secures gas supply tubing to nebulizer or auxiliary gas connector (2 required)

CPLSP5125, Transducer assy + O-ring, Ultrasonic Neb

3710031500, Tubing, 1/8 inch id, 1/4 inch od, 1/16 inch wall thickness.

0890-2603, Tubing, PFA, for gas supply to nebulizer, 3 mm id, per m

G8010-80035, UniFit sample connector, 0.75 mm id, for U-Series SeaSpray concentric nebulizer used with Agilent 5000 Series ICP-OES, 10/pk

5005-0445, V-groove, inert high TDS nebulizer connection kit for AVS 4/6/7 switching valves, 1/pk

G8010-60256, Double-pass spray chamber, glass cyclonic design with ball joint socket and UniFit drain outlet, for Agilent 5000 series ICP-OES

G8010-60271, ICP Single-pass spray chamber, glass cyclonic design with ball joint socket and UniFit drain outlet, for Agilent 5000 series ICP-OES

G8014-68002, Inert spray chamber for Agilent 5000 series ICP-OES and MP-AES. Double pass design with removable baffle and ball joint outlet

G8010-68024, IsoMist spray chamber, cyclonic, twister style (double-pass), with thermal conductive polymer encapsulation, for IsoMist with RoL configuration.

7910043700, Spray chamber, cyclonic action, double-pass, glass for axial 700 series and Liberty ICP-OES with organic solvents, high matrix, high total dissolved solids

2010081700, Spray chamber, cyclonic action, single-pass, glass, for 700 series and Liberty ICP-OES. Provides improved sensitivity with low matrix samples

9910070400, Spray chamber, glass, double-pass, cooled with cooling gallery for highly volatile organic solvents

G8460-68001, Adaptor kit to fit inert spray shamber (p/n G8014-68002) for the Agilent 700, Vista, and Liberty series ICP-OES

G8000-64140, Clamp for torch with ball joint socket used with MP-AES/ICP-OES

G8014-68007, Drain connector, 10/32UNF to Luer Slip, for inert spray chamber (p/n G8014-68002)

G8014-68002, Inert spray chamber for Agilent 5000 series ICP-OES and MP-AES. Double pass design with removable baffle and ball joint outlet

G8003-60019, Nebulizer locking nut for Agilent inert spray chamber for ICP-OES/MP-AES and MP-AES glass spray chamber.

G8014-68005, O-ring kit for inert spray chamber (p/n G8014-68002)

G8014-20002, Replacement baffle (internal), for inert spray chamber (p/n G8014-68002)

G8010-80036, UniFit drain connector, 2.0 mm od x 0.86 mm id, for spray chamber used with Agilent 5000 Series ICP-OES, with 480 mm capillary tubing, 3/pk

G8010-68023, Drain fitting, right-angle, UniFit, for waste outlet from IsoMist spray chamber, 3/pk

G8010-68024, IsoMist spray chamber, cyclonic, twister style (double-pass), with thermal conductive polymer encapsulation, for IsoMist with RoL configuration.

G8010-68011, PuraFlex transfer tube for IsoMist used with Agilent 5000 series ICP-OES

G8460-68001, Adaptor kit to fit inert spray shamber (p/n G8014-68002) for the Agilent 700, Vista, and Liberty series ICP-OES

G8460-20005, Ball joint adapter to connect inert spray shamber (p/n G8014-68002) to the Agilent 700, Vista, and Liberty series ICP-OES

110868000, Bracket for mounting Multi-Mode Sample Introduction System (MSIS) on axial and radial ICP, for all Agilent 700 series

410328600, Bracket for mounting Sturman-Masters spray chamber on 700, Vista and Liberty series axial ICP-OES

410298400, Bracket for mounting Sturman-Masters spray chamber on radial ICP

110665200, Bracket, for mounting glass cyclonic spray chambers on axial ICP

110611700, Bracket, for mounting glass cyclonic spray chambers on radial ICP

G8010-60227, Clamp for ball joint connector between spray chamber and inert torch, for Agilent MP-AES

G8000-64140, Clamp for torch with ball joint socket used with MP-AES/ICP-OES

G8014-68007, Drain connector, 10/32UNF to Luer Slip, for inert spray chamber (p/n G8014-68002)

G8010-68023, Drain fitting, right-angle, UniFit, for waste outlet from IsoMist spray chamber, 3/pk

G8010-68024, IsoMist spray chamber, cyclonic, twister style (double-pass), with thermal conductive polymer encapsulation, for IsoMist with RoL configuration.

6910001200, O-ring for nebulizer inlet of single and double-pass spray chamber

G8014-68005, O-ring kit for inert spray chamber (p/n G8014-68002)

G8010-68011, PuraFlex transfer tube for IsoMist used with Agilent 5000 series ICP-OES

G8014-20002, Replacement baffle (internal), for inert spray chamber (p/n G8014-68002)

9910057200, Sample compartment O-ring kit

G8010-80036, UniFit drain connector, 2.0 mm od x 0.86 mm id, for spray chamber used with Agilent 5000 Series ICP-OES, with 480 mm capillary tubing, 3/pk

G8479-68000, Accessory kit to adapt the Multimode Sample Introduction System (MSIS) for use with Agilent 700 and Vista Series axial ICP-OES

G8479-68001, Accessory kit to adapt the Multimode Sample Introduction System (MSIS) for use with Agilent 700 and Vista Series radial ICP-OES

G8000-63003, Accessory kit to adapt the Multimode Sample Introduction System (MSIS), for use with Agilent 5000 Series ICP-OES.

110868000, Bracket for mounting Multi-Mode Sample Introduction System (MSIS) on axial and radial ICP, for all Agilent 700 series

G8479-60100, MSIS drain tube assembly

G8479-20020, MSIS nebulizer bushing, with O-rings

G8479-60300, MSIS reaction cone assembly

G8479-68100, MSIS reagent tubing kit

3710068900, MSIS tubing to pump waste Aqueous PVC Peristaltic pump tubing, PVC, 2 tabs, black/white, 3.18 mm id), 12/pk

G8479-67000, O-rings for MSIS nebulizer bushing, 1 pair

7910050700, One piece quartz torch with ball joint for axial 700, Vista, and Liberty Series ICP-OES

3710027200, PVC peristaltic pump tubing, black/black tabs, for pumping reagents with Agilent VGA 76/77 vapor generation accessory, 12/pk

7910052900, Torch, radial, with ball joint, 1/pk

7910052700, Transfer tubing, 160 L, includes clip, 1/pk

G8020-68022, Easy-fit fully demountable inert torch kit, for high matrix/high TDS samples, with 2.4 mm id alumina injector

G8020-68020, Easy-fit fully demountable inert torch, 1.4 mm id alumina injector, for Li-battery materials, for 5000 series VDV/SVDV ICP-OES

G8020-68003, Easy-fit fully demountable inert torch, 1.8 mm id alumina injector for HF digests, for 5000 Series VDV/SVDV ICP-OES

G8020-68001, Easy-fit fully demountable torch, 0.8 mm id quartz injector for volatile organics, for 5000 series RV (radial) ICP-OES.

G8020-68007, Easy-fit fully demountable torch, 1.4 mm id quartz injector for semi-volatile organics, for 5000 series RV (radial) ICP-OES.

G8020-68002, Easy-fit fully demountable torch, 1.4 mm id quartz injector for semi-volatile organics, for 5000 series VDV/SVDV ICP-OES.

G8020-68005, Easy-fit fully demountable torch, 1.8 mm id quartz injector for routine samples, for 5000 Series VDV/SVDV ICP-OES

G8020-68004, Easy-fit fully demountable torch, 2.4 mm id quartz injector for high TDS sample, for 5000 Series VDV/SVDV ICP-OES

G8012-60000, Easy-fit one piece torch, 1.4 mm id quartz injector for semi-volatile organics, for 5000 series RV (radial) ICP-OES

G8010-60228, Easy-fit one piece torch, 1.8 mm id quartz injector, for 5000 Series VDV/SVDV ICP-OES

G8010-60234, Easy-fit semi-demountable inert torch, 1.8 mm id alumina injector, for 5000 Series RV (radial) ICP-OES

G8010-60231, Easy-fit semi-demountable inert torch, 1.8 mm id alumina injector, for 5000 Series VDV/SVDV ICP-OES

G8010-60237, Easy-fit semi-demountable torch, 1.4 mm id quartz injector for semi-volatile organics, for 5000 series RV (radial) ICP-OES.

G8010-60236, Easy-fit semi-demountable torch, 1.8 mm id quartz injector, for 5000 series VDV/SVDV ICP-OES

G8010-60232, Easy-fit semi-demountable torch, 2.4 mm id quartz injector for high solids, for 5000 series VDV/SVDV ICP-OES

9910106300, Fully demountable inert torch assembly kit for axial 700, Vista and Liberty Series ICP-OES

9910106400, Fully demountable inert torch assembly kit for radial 700, Vista and Liberty Series ICP-OES

7910050700, One piece quartz torch with ball joint for axial 700, Vista, and Liberty Series ICP-OES

9910084700, Semi-demountable inert torch assembly for axial 700 Series, Vista Series, and Liberty ICP-OES

9910056800, Semi-demountable inert torch assembly for radial 700 Series, Vista Series, and Liberty ICP-OES

2010094800, Torch, high-solids Agilent injector design, 2.4 mm id, for axial 700, Liberty, and Vista series ICP-OES.

2010095000, Torch, high-solids, Agilent injector design, 1.8 mm id for radial 700, Liberty and Vista Series ICP-OES

2010104600, Torch, high-solids, 2.4 mm id with extended length outer tube for axial 700, Liberty, and Vista series ICP-OES

2010104700, Torch, low-flow, quartz, 0.8 mm id injector tube, for axial 700, Liberty, and Vista series ICP-OES

2010117400, Torch, low-flow, quartz, 0.8 mm id injector tube, for radial 700, Liberty and Vista Series ICP-OES

2010090400, Torch, low-flow, quartz, 2.4 mm id injector tube, for axial 700, Liberty, and Vista series ICP-OES

2010104800, Torch, low-flow, quartz, 1.4 mm id injector tube, for axial 700, Liberty, and Vista series ICP-OES

2010069690, Torch, low-flow, quartz, 1.4 mm id injector tube, for radial 700, Liberty and Vista Series ICP-OES

2010117500, Torch, low-flow, quartz, 1.4 mm id injector tube, for radial 700, Liberty and Vista Series ICP-OES

7910052900, Torch, radial, with ball joint, 1/pk

2010122400, Torch, sheath gas, high-solids with Agilent injector design, 2.4 mm id for axial 700, Liberty, and Vista series ICP-OES

G8010-60264, Quartz outer tube set for Agilent 5000 series RV ICP-OES

G8010-60263, Quartz outer tube set for Agilent 5000 series VDV/SVDV ICP-OES

G8016-60000, Quartz outer tubeset, for organic solvents, Agilent 5000 series RV ICP-OES

G8014-60022, Quartz outer tubeset, for organic solvents, Agilent 5000 series VDV/SVDV ICP-OES

G8020-47002, 0.8 mm id alumina injector, inert, for fully demountable torch

G8020-47003, 1.4 mm id alumina injector, inert, for fully demountable inert torch

G8020-47005, 1.8 mm id alumina injector, inert, for fully demountable inert torch

G8020-47004, 2.4 mm id alumina injector, inert, for fully demountable inert torch

2410067590, Alumina injector tube, 1.8 mm, for semi-demountable torch for 700, Vista, and Liberty series ICP-OES

2010095900, Alumina injector, 1.8 mm id, for 700, Vista, and Liberty series ICP-OES fully demountable torch

2010101700, Ceramic injector, 2.4 mm id, for fully demountable torch for axial and radial ICP

2010077500, Injector, quartz, 0.8 mm id, for semi-demountable torch for 700, Vista, and Liberty series ICP-OES

2010096000, Injector, quartz, 1.0 mm id, for fully demountable torch for radial 700, Vista, and Liberty series ICP-OES

2010095600, Injector, quartz, 1.5 mm id, for fully demountable torch for radial 700, Vista, and Liberty series ICP-OES

9910057000, Injector, quartz, 1.8 mm ID, for semi-demountable torch for 700, Vista, and Liberty series ICP-OES. 3/pk

2010095400, Injector, quartz, 2.4 mm id, for fully demountable torch for 700, Vista, and Liberty series ICP-OES

2010101800, Quartz injector, 1.8 mm id, tapered, 1 pk. Suits fully demountable torch for 700, Vista, and Liberty series ICP-OES

G8020-60805, Quartz injector, tapered, 0.8 mm id, for fully demountable torch

G8020-60806, Quartz injector, tapered, 1.4 mm id, for fully demountable torch

G8020-60807, Quartz injector, tapered, 1.8 mm id, for fully demountable torch

G8020-60808, Quartz injector, tapered, 2.4 mm id, for fully demountable torch

G8020-60810, Injector locking nut, for fully demountable torch. For use with Agilent 5100/5110 and 5800/5900 series ICP-OES instruments 1/pk. This secures the injector in the torch base.

G8010-67000, Storage rack for 5000 series ICP-OES torches

G8014-60023, Top seal for fully and semidemountable torches, 3/pk

G8010-68021, Torch cleaning stand for 5000 series ICP-OES torches.

2010095800, Ceramic outer tube for radial 700, Vista, and Liberty Series ICP-OES fully demountable torch.

9910106300, Fully demountable inert torch assembly kit for axial 700, Vista and Liberty Series ICP-OES

9910106400, Fully demountable inert torch assembly kit for radial 700, Vista and Liberty Series ICP-OES

9910107100, GazFit fittings, 6 mm id, for one piece and semi-demountable ICP-OES torches, 4/pk

9910057300, Injector holder kit for semi-demountable torch

9910108200, O-ring kit for fully demountable torch 700 series, Vista, and Liberty ICP-OES

2010095200, Quartz outer tube for axial 700, Vista, and Liberty Series ICP-OES fully demountable torch.

2010095300, Replacement quartz intermediate tube for axial and radial 700, Vista, and Liberty Series ICP-OES fully demountable torch

9910084700, Semi-demountable inert torch assembly for axial 700 Series, Vista Series, and Liberty ICP-OES

9910056800, Semi-demountable inert torch assembly for radial 700 Series, Vista Series, and Liberty ICP-OES

7910044400, Spare fully demountable torch body, for axial 700, Vista, and Liberty Series ICP-OES

7910044500, Spare fully demountable torch body, for radial 700, Vista, and Liberty Series ICP-OES

2010070790, Spare quartz torch bonnet for radial ICP-OES

2010083400, Spare semi-demountable quartz torch body, for axial 700, Vista, and Liberty Series ICP-OES

2010072900, Spare semi-demountable quartz torch body, for radial 700, Vista, and Liberty Series ICP-OES

3710033400, Tubing 1/4 in id and 3/8 in od

G8000-64140, Clamp for torch with ball joint socket used with MP-AES/ICP-OES

9910107100, GazFit fittings, 6 mm id, for one piece and semi-demountable ICP-OES torches, 4/pk

9910057300, Injector holder kit for semi-demountable torch

9910108200, O-ring kit for fully demountable torch 700 series, Vista, and Liberty ICP-OES

2410023800, Silicone tubing, 3/16 in id x 5/16 in od, per meter, for 700 Series, Vista Series, and Liberty ICP-OES

2010070790, Spare quartz torch bonnet for radial ICP-OES

G8010-67000, Storage rack for 5000 series ICP-OES torches

G8010-68021, Torch cleaning stand for 5000 series ICP-OES torches.

7910051290, Transfer tube FEP cyclone spray chamber for radial ICP

7910051490, Transfer tube FEP Sturman-Masters spray chamber for radial ICP

7910051590, Transfer tube, fluorinated ethylene propylene (FEP, for axial ICP with cyclonic and inert Sturman-Masters spray chambers.

3710033400, Tubing 1/4 in id and 3/8 in od

G8010-68103, Gold work coil assembly for Agilent 5000 series ICP-OES

G8020-68017, Work Coil Assembly, copper

8003-0459, Aqueous PVC Peristaltic pump tube, PVC, red/red, 2-stop, for drain, 12/pk

3710068200, Aqueous PVC Peristaltic pump tubing, 2 tabs, orange/green, 0.38 mm id, for aqueous samples,12/pk

3710034600, Aqueous PVC Peristaltic pump tubing, blue/blue, 12/pk

3710034500, Aqueous PVC Peristaltic pump tubing, gray/gray, 12/pk

3710068300, Aqueous PVC Peristaltic pump tubing, orange/green tabs, flared ends, 0.38 mm id), for aqueous samples, 12/pk

3710027300, Aqueous PVC Peristaltic pump tubing, purple/black tabs, for pumping reagents with Agilent VGA 76/77 vapor generation accessory, 12/pk

3710068800, Aqueous PVC Peristaltic pump tubing, PVC, 2 tabs orange/orange, 0.89 mm id, for aqueous samples, 12/pk

3710034400, Aqueous PVC Peristaltic pump tubing, white/white, 12/pk

3710034800, High acid tolerant PVC Solvaflex Peristaltic pump tubing, black/black 2 bridged.

3710067900, High acid tolerant PVC Solvaflex Peristaltic pump tubing, blue/blue, for organics, 15/pk

3710035200, High acid tolerant PVC Solvaflex Peristaltic pump tubing, gray/gray

3710068100, High acid tolerant PVC Solvaflex Peristaltic pump tubing, orange/green tabs with flared ends, 15/pk

3710068000, High acid tolerant PVC Solvaflex Peristaltic pump tubing, orange/green, for organics and high TDS, 15/pk

3710047000, High acid tolerant PVC Solvaflex Peristaltic pump tubing, purple/black

3710035000, High acid tolerant PVC Solvaflex Peristaltic pump tubing, white/white

3710068900, MSIS tubing to pump waste Aqueous PVC Peristaltic pump tubing, PVC, 2 tabs, black/white, 3.18 mm id), 12/pk

3710043600, Organic resistant (aromatic) FPM Peristaltic pump tubing, black/black

3710053600, Organic resistant (aromatic) FPM Peristaltic pump tubing, black/black, 6/pk

3710043900, Organic resistant (aromatic) FPM Peristaltic pump tubing, blue/blue

3710053900, Organic resistant (aromatic) FPM Peristaltic pump tubing, blue/blue 6/pk

3710053500, Organic resistant (aromatic) FPM Peristaltic pump Tubing, FPM, Peristaltic pump, orange/yellow, 6/pk

3710043800, Organic resistant (aromatic) FPM Peristaltic pump tubing, gray/gray 12/pk

3710053800, Organic resistant (aromatic) FPM Peristaltic pump tubing, gray/gray, 6/pk

3710068600, Organic resistant (aromatic) FPM Peristaltic pump tubing, orange/green tabs, 0.38 mm id, 12/pk

3710068700, Organic resistant (aromatic) FPM Peristaltic pump tubing, orange/green tabs, flared ends , 0.38 mm id, 12/pk

3710043500, Organic resistant (aromatic) FPM Peristaltic pump tubing, orange/yellow

3710043700, Organic resistant (aromatic) FPM Peristaltic pump tubing, white/white

3710053700, Organic resistant (aromatic) FPM Peristaltic pump tubing, white/white, 6/pk

3710041700, Organic resistant (aromatic) FPM Peristaltic pump tubing, yellow/yellow 12/pk

9910075900, Organic resistant (ketones) Marprene Peristaltic pump tubing, orange/orange tabs, 6/pk

3710044100, Organic resistant (ketones) Marprene Peristaltic Pump tubing, black/black

3710044400, Organic resistant (ketones) Marprene Peristaltic pump tubing, blue/blue, 12/pk

3710044300, Organic resistant (ketones) Marprene Peristaltic pump tubing, gray/gray, 12/pk

3710044000, Organic resistant (ketones) Marprene Peristaltic pump tubing, orange/yellow, 12/pk

3710044200, Organic resistant (ketones) Marprene Peristaltic pump tubing, white/white, 12/pk

3710041800, Organic resistant (ketones) Santoprene Peristaltic pump tubing, yellow/yellow, 15/pk

3710041900, Organic resistant (ketones) Santoprene Peristaltic pump tubing, black/black, 15/pk

3710068400, Organic resistant (ketones) Santoprene Peristaltic pump tubing, orange/green tabs, 0.38 mm id, 12/pk

3710068500, Organic resistant (ketones) Santoprene Peristaltic pump tubing, orange/green tabs, flared ends, 0.38 mm id, 12/pk

3710027200, PVC peristaltic pump tubing, black/black tabs, for pumping reagents with Agilent VGA 76/77 vapor generation accessory, 12/pk

3710046900, PVC peristaltic pump tubing, for aqueous samples, orange/white, 12/pk

3710069200, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, 3-bridged, black/black tabs, flared ends, 0.76 mm id

3710049000, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, 3-bridged, gray/gray tabs, 1.3 mm id

5043-0063, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, 3-bridged, purple/white tabs, 2.79 mm id

3710069000, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, orange/yellow tabs, flared ends, 0.51 mm id

3710069300, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, yellow/yellow tabs, 1.42 mm id, 12/pk

3710069100, SPS 3/4 Organic resistant (aromatic) FPM Peristaltic pump tubing, black/black tabs, flared ends, 0.76 mm id

3710057500, SPS 3/4 Organic resistant (ketones) Santoprene, pump tubing, 3-bridged, gray/gray, 6/pk

9910124000, Internal standard kit, no. 1, with black/black peristaltic pump tubing

9910124100, Internal standard kit, no. 2, orange/white peristaltic pump tubing

1610132400, ISTD Connector, Y-piece for online addition of internal standard/ionization buffer

5190-8446, ISTD Scandium (Sc) standard, 10,000 µg/mL, in 5% HNO3, 100 mL

5190-8555, ISTD Yttrium (Y) standard, 1,000 µg/mL, in 5% HNO3, 100 mL

5190-8232, ISTD Yttrium (Y) standard, 10,000 µg/mL, in 5% HNO3, 100 mL

3710033700, Joining tube, PVC, 0.030 inch id

3710027200, PVC peristaltic pump tubing, black/black tabs, for pumping reagents with Agilent VGA 76/77 vapor generation accessory, 12/pk

3710046900, PVC peristaltic pump tubing, for aqueous samples, orange/white, 12/pk

G8010-60306, Autosampler connection kit for AVS switching valve

G8010-60348, ICP-OES connection kit, autosampler to peristaltic pump

G8010-60307, Internal standard connection kit, for AVS 7 switching valve

9910124000, Internal standard kit, no. 1, with black/black peristaltic pump tubing

9910124100, Internal standard kit, no. 2, orange/white peristaltic pump tubing

G8479-68100, MSIS reagent tubing kit

G8010-60333, Nebulizer adaptor kit, for AVS 4 switching valve

G8010-60304, Nebulizer connection kit for AVS switching valve

G8010-60308, Pump outlet connection kit, for AVS switching valve

G8485-60519, Pump tubing kit for SVS2+

G8410-68261, Rinse tube kit, for Agilent SPS 4 Autosampler, for low-volatile organic solvents in rinse station

9910057100, Sample compartment/torch box tube connection kit

G8010-60303, Sample inlet connection kit for AVS switching valve

G8010-60335, Sample/Rinse connection kit, for AVS switching valve, 2/pk

7910063800, SVS 2 tubing kit

G3286-80118, Tubing and connector kit, drain pump, Tygon, Agilent ASX-500 series autosampler

9910097500, Tubing and connector kit, for axial ICP

9910105400, Tubing and connectors kit for Agilent radial ICP

G3286-80117, Tubing hook-up kit, rinse/drain, Agilent ASX-500 series autosampler, 3/16 in id, 72 in, 1/8 in id, 84 in

3710066700, Tubing kit for SVS 2 Fast Uptake Pump

9910123600, Tubing kit, aqueous, axial ICP, for concentric nebulizer and glass cyclonic spray chamber

9910123800, Tubing kit, aqueous, axial ICP, for inert OneNeb/V-groove nebulizer and Sturman-Masters spray chamber

9910123700, Tubing kit, aqueous, radial ICP, for concentric nebulizer and glass cyclonic spray chamber

9910123900, Tubing kit, aqueous, radial ICP, for inert OneNeb/V-groove nebulizer and Sturman-Masters spray chamber

9910124200, Tubing kit, organic, axial ICP, for low volatile organic solvents with concentric nebulizer and glass cyclonic spray chamber

9910124400, Tubing kit, organic, axial ICP, for low volatile organic solvents with inert OneNeb/V-groove nebulizer and Sturman-Masters spray chamber

9910124300, Tubing kit, organic, radial ICP, for low volatile organic solvents with concentric nebulizer and glass cyclonic spray chamber

9910124500, Tubing kit, organic, radial ICP, for low volatile organic solvents with inert OneNeb/V-groove nebulizer and Sturman-Masters spray chamber

G8485-60523, Valve tubing kit, SVS1+

G8485-60515, Valve tubing kit, SVS2+ switching valve system

G8010-60334, Waste tube kit, for 4 Port AVS switching valve

G8010-60834, Capillary transfer line, connects SVS 2 switching valve to U-Series nebulizer inlet, 50 mm long with UniFit connector

G8010-40026, Clip to secure spray chamber drain tube to the sample tray, for Agilent 5000 series ICP-OES

3710024600, Drain tubing for spray chamber waste, 0.12" id x 0.062" thick.

3710033900, Drain tubing for Sturman-Masters spray chamber waste. 1.57 mm id.

G8010-68011, PuraFlex transfer tube for IsoMist used with Agilent 5000 series ICP-OES

G8410-80123, Replacement tubing for inlet rinse solution supply to rinse station of Agilent SPS 4 autosampler

7910051290, Transfer tube FEP cyclone spray chamber for radial ICP

7910051490, Transfer tube FEP Sturman-Masters spray chamber for radial ICP

7910051590, Transfer tube, fluorinated ethylene propylene (FEP, for axial ICP with cyclonic and inert Sturman-Masters spray chambers.

3710033400, Tubing 1/4 in id and 3/8 in od

3710035700, Tubing, 1.6 mm id, 1.6 mm wall, ketone resistant, spray chamber to peristaltic pump waste line

3710031500, Tubing, 1/8 inch id, 1/4 inch od, 1/16 inch wall thickness.

G8485-60520, Tubing, bubble injector, 220 mm, for SVS2+ switching valve system

2410020500, Tubing, capillary, nebulizer, for ketone-based organic samples, per m

G8485-60516, Tubing, carrier/rinse, 350 mm, SVS2+ switching valve system

3710025400, tubing, clear, PVC, cap to SPS probe, 1 mm, 1/pk

3710052400, Tubing, FEP, 0.0625 inch od x 0.02 inch id, 1/pk

G8485-60521, Tubing, inlet, PVC, 0.1 m, 2.5 mm id, for SVS2+ switching valve system

G8485-60517, Tubing, internal standard, 350 mm, SVS2+ switching valve system

G8485-60522, Tubing, PFA, 3 m, 1/16 in od, 0.04 in id, for SVS2+ switching valve system

0890-2603, Tubing, PFA, for gas supply to nebulizer, 3 mm id, per m

G8410-80122, Tubing, PVC, 8 mm od, 5 mm id, 2 m

3710035400, Tubing, solvent resistant drain, for spray chamber to peristaltic pump waste line, used with glass cyclonic spray chamber, per m

G8410-20012, Tubing, solvent resistant, 0.093 inch id, 2 m

G8410-20013, Tubing, solvent-resistant, 0.187 inch id, 2 m

3710035300, Tubing, spray chamber to peristaltic pump waste line, 1.57 mm id, 3.17 mm od

3710037800, Tubing, Tygon, 6.4 mm id, 1.6 mm wall, spray chamber outlet to torch

G8020-68023, High TDS application kit for 5000 series ICP-OES

G8010-68007, Inert sample introduction kit, for HF digests, for Agilent 5000 series Dual View (VDV/SVDV) ICP-OES

G8010-68006, Inert sample introduction kit, for HF digests, for Agilent 5000 series RV ICP-OES

G8010-68009, Ketone solvent sample introduction kit for Agilent 5000 series Dual View (VDV/SVD) ICP-OES

G8010-68008, Ketone solvent sample introduction kit for Agilent 5000 series RV ICP-OES

G8010-68029, Semi-volatile organic sample introduction kit, for 5000 series dual view (VDV/SVDV) ICP-OES

G8010-68030, Semi-volatile organic sample introduction kit, for 5000 series RV ICP-OES.

G8010-68005, Volatile organic sample introduction kit for Agilent 5000 series Dual View (VDV/SVDV) ICP-OES

G8010-68004, Volatile organic sample introduction kit for Agilent 5000 series RV ICP-OES

G8010-67001, Operating supplies kit for Agilent 5000 series Dual View (DV/SVDV) ICP-OES

G8012-67001, Operating supplies kit for Agilent 5000 series Radial View ICP-OES

6810008700, Filter drierite - small

G8000-68002, Inlet cooling air filter for the Agilent MP-AES

6810010000, Large argon filter, charcoal, externally mounted, for polychrmator gas line.

G8020-68016, Replacement air inlet filter element, for 5800/5900 ICP-OES

G8010-60136, Replacement argon inlet filter, Agilent 5000 Series ICP-OES

G8010-60189, Replacement filter element for cooling air inlet. Suits the dusty environment air inlet filter option for 5100 and 5110.

6810008600, Small argon filter, charcoal, internally mounted, for detector gas line purge

G8010-60346, Gas humidifier, for Nebulizer carrier gas, for 5000 Series ICP-OES and 4200 Series MP-AES

5190-0148, Replacement bottle, 250 mL, clear, no cap, for use with Argon humidifier

5069-4496, Replacement membrane tube, 300 mm, with female locking Luer for Argon humidifier

G8400-60710, Tubing set, for argon humidifier, for Agilent ICP-MS,ICP-OES and MP-AES

G3292-80012, Obsolete. Replaced by 5799-0037

G1833-67024, Strainer for cooling water for Agilent ICP-MS

G8460-20005, Ball joint adapter to connect inert spray shamber (p/n G8014-68002) to the Agilent 700, Vista, and Liberty series ICP-OES

1610093000, Barb connector for waste line, polypropylene, 1/16 inch id to 1/16 inch id

G8410-80124, Barb connector, 2.5 mm to 1.5 mm id

0100-2848, Barb connector, straight-through, 2.4 mm id, for Agilent SPS 4 autosampler

0100-2846, Barb connector, straight-through, 4.8 mm to 2.4 mm id, for Agilent SPS 4 autosampler

G8485-80001, Barb fitting, 1/4-28 male to 1/8 in, for SVS2+ switching valve system

5043-0502, Conical adapter, for 1/16 inch od sample line, of OneNeb Series 2 nebulizer

1610085600, Connector, for nebulizer gas flow, 1/4 inch, connects to nebulizer gas outlet on Agilent ICP-OES

1610085300, Connector, for nebulizer gas flow, 1/8 inch, connects nebulizer gas outlet on Agilent ICP-OES

G8014-68007, Drain connector, 10/32UNF to Luer Slip, for inert spray chamber (p/n G8014-68002)

G8010-68023, Drain fitting, right-angle, UniFit, for waste outlet from IsoMist spray chamber, 3/pk

8003-0463, End cap O-ring, for spray chamber with type A/C/K nebulizers, for Optima 5/7/8x00

G8010-68002, External air inlet duct adaptor, for Agilent 5100/5110 ICP-OES and MP-AES.

1610146100, EzyFit connector for concentric nebulizer, 1/16 inch od x 0.5 mm id, sample inlet, 10/pk

1610136600, Ferrule Upchurch, 1/16 inch tubing, P-240, 1/pk

1610136500, Flangeless fitting 1/4-28 P218 for SVS 1 1/pk

9910127800, Gas inlet connector, for concentric glass nebulizer used with ICP-OES

1610088400, Gas outlet adapter for Liberty ICP-OES.

3710033700, Joining tube, PVC, 0.030 inch id

8003-0953, Nebulizer adaptor, 16/6, for spray chambers with bung fitting for the nebulizer, not compatible with spray chambers that use the Helix seal

6910008200, Nebulizer bung O-ring kit, 7/32 inch id, 11/32 inch od

6910001200, O-ring for nebulizer inlet of single and double-pass spray chamber

9910108200, O-ring kit for fully demountable torch 700 series, Vista, and Liberty ICP-OES

G8014-68005, O-ring kit for inert spray chamber (p/n G8014-68002)

6910006000, O-ring, nitrile, 11/16 inch id, 13/16 inch od, 1/16 inch thick, for Mark VI and Sturman-Masters spray chambers for AA/ICP-OES

G8010-80043, Replacement Helix locking screw for ICP spray chamber

G8010-80042, Replacement Helix seal for ICP spray chamber, 4/pk

G8410-80121, Replacement nipple, polypropylene, 2.5 mm id

G8410-80120, Replacement nipple, polyvinylidene difluoride, 5 mm id

1610136400, Sample inlet (EzyFit) fitting for concentric glass nebulizer on radial ICP-OES

9910107700, Sample inlet (EzyFit) fitting for Conikal glass concentric nebulizer.

G8010-60345, Sample inlet fitting, for OneNeb Series 2 nebulizer

CP913777, Sample inlet tubing for inert Mira Mist nebulizer used with ICP-OES/ICP-MS

7210019300, Screwdriver, PoziDriv No. 2, long handle

G8010-80036, UniFit drain connector, 2.0 mm od x 0.86 mm id, for spray chamber used with Agilent 5000 Series ICP-OES, with 480 mm capillary tubing, 3/pk

G8010-80035, UniFit sample connector, 0.75 mm id, for U-Series SeaSpray concentric nebulizer used with Agilent 5000 Series ICP-OES, 10/pk

8110002800, Esteele cleaning powder, for cleaning interface cone for ICP-OES

1510220200, Finger nut for ICP-OES pre-optics cone

G8010-68109, Pre-optics cone for Agilent 5000 series ICP-OES

3610007300, Pre-optics cone, for Agilent Vista/700 series axial ICP-OES

3610006200, Pre-optics cone-Liberty axial ICP-OES

G8010-68015, Replacement glass, calcium fluoride, for radial view pre-optics window assembly, Agilent 5000 Series ICP-OES

G8010-68014, Replacement glass, quartz, for axial view pre-optics window assembly, Agilent 5000 series ICP-OES

G8010-68018, Replacement O-ring, 0.799 inch id, 0.103 cross section, for axial view pre-optics window assembly, Agilent 5000 series ICP-OES

3710027300, Aqueous PVC Peristaltic pump tubing, purple/black tabs, for pumping reagents with Agilent VGA 76/77 vapor generation accessory, 12/pk

9910062000, Gas-liquid separator VGA-77P for ICP

9910062200, ICP hydride module VGA 77. A separate hydride module should be used exclusively for Hg determinations to reduce cross contamination

9910050700, KIT PUMP TUBE BEDS VGA 7677

3710027200, PVC peristaltic pump tubing, black/black tabs, for pumping reagents with Agilent VGA 76/77 vapor generation accessory, 12/pk

8210029100, Sodium tetrahydridoborate(NaBH4), 500 g, hazardous

9910061900, Tubing and connector kit for VGA 77

G3280-80503, Quartz Spray chamber with fixed connector to torch, Scott double-pass, recommended for ultra-trace analysis of Boron

G3280-80008, Quartz Spray chamber, Scott double-pass, standard for Agilent 7500, 7700, 7800 and 8800

G8400-67150, Quartz Spray chamber, Scott double-pass, standard for Agilent 7850, 7900 and 8900 with UHMI

G3280-80603, Spray chamber, single-pass, suitable for capillary LC interface and very low-flow sample introduction applications

G3270-80026, Obsolete. No replacement recommendation.

G4912-80016, PFA Connector, spray chamber to torch, long with gas port, for inert sample introduction kit

G3270-80024, Quartz connector from spray chamber to torch with dilution port for high matrix introduction (HMI)

G3270-80025, Quartz connector from spray chamber to torch, without gas port

5042-4775, Connector for make-up argon gas line at spray chamber end cap

G3280-60008, End cap for Scott spray chamber

G8400-40200, End cap locking ring for spray chamber, for Agilent 7900 and 8900 ICP-MS with UHMI

G3280-67091, End cap retainer, used with series 7700 and 8800 ICP-MS systems, models 7700s and 7700x

0535-1082, Nut for nebulizer connection at Scott spray chamber end cap for Agilent ICP-MS

G3285-80020, PFA end cap for Scott PFA spray chamber, with makeup gas port, suits inert sample introduction kit

5005-0022, Easy-Fit Peristaltic pump tubing, long-life, standard for spray chamber drain, 1 pack of 12 pcs

5005-0023, Easy-Fit Peristaltic pump tubing, optional high matrix sample and ISTD uptake, recommended for aqueous acid matrix, 1 pack of 12 pcs

5005-0026, Easy-Fit Peristaltic pump tubing, optional PVC solvent flexible high matrix sample and ISTD uptake, 1 pack of 12 pcs

5005-0027, Easy-Fit Peristaltic pump tubing, optional PVC solvent flexible internal standard (ISTD) uptake, 1 pack of 12 pcs

5005-0025, Easy-Fit Peristaltic pump tubing, optional PVC solvent flexible sample uptake, 1 pack of 12 pcs

5005-0021, Easy-Fit Peristaltic pump tubing, standard for Internal Standard uptake, recommended for aqueous acid matrix, 1 pack of 12 pcs

5005-0020, Easy-Fit Peristaltic pump tubing, standard for sample uptake, recommended for aqueous acid matrix, 1 pack of 12 pcs

G1833-65569, Obsolete. Replaced by 5005-0020

G3280-67047, Obsolete. Replaced by 5005-0021

G1833-65570, Obsolete. Replaced by 5005-0022

5064-8101, Obsolete. Replaced by 5005-0023

G4911-67000, Peristaltic pump tubing for ISIS, Flared end PVC Tygon®, 2-stop, orange/blue tabs, 0.25 mm id, 1 pack of 12 pcs

G3138-65128, Peristaltic pump tubing for ISIS, Ismaprene, 2-stop, orange/purple tabs, 2.54 mm id, 1 pack of 6 pcs

5043-0010, Peristaltic pump tubing for ISIS-DS, PVC Tygon®, 2-stop, black/purple tabs, 2.29 mm id, 1 pack of 12 pcs

5064-8015, Peristaltic pump tubing for ISIS-DS, PVC Tygon®, 2-stop, orange/blue tabs, 0.25 mm id, 1 pack of 12 pcs

5064-8028, Peristaltic pump tubing for ISIS-DS, PVC Tygon®, 2-stop, white/white tabs, 1.02 mm id, 1 pack of 12 pcs

5064-8014, Peristaltic pump tubing for ISIS-DS, PVC Tygon®, 3-stop, orange/orange tabs, 0.89 mm id, 1 pack of 12 pcs

G3160-65327, Peristaltic pump tubing set for pumping drain/uptake, for Agilent integrated autosampler (I-AS), Tygon, with connectors, 5/pk

G3280-67008, Peristaltic pump tubing, for internal standard (ISTD) uptake, Flared end PVC Tygon®, 2-stop, orange/red tabs, 0.19 mm id, 1 pack of 12 pcs

G1833-65571, Peristaltic pump tubing, for internal standard (ISTD) uptake, PVC Tygon®, 3-stop, orange/red tabs, 0.19 mm id, 1 pack of 12 pcs

5042-4799, Peristaltic pump tubing, recommended for spray chamber drain for xylene analysis, 1 pc

G1820-65217, Peristaltic pump tubing, Silicone, 3-stop, white/white tabs, 1.02 mm id, 1 pack of 6 pcs

G3160-65326, Tubing, peristaltic pump, for pumping drain/uptake, for Agilent integrated autosampler (I-AS)

G3160-65320, Tubing, rinse solution inlet/outlet, Agilent integrated autosampler (I-AS)

G3160-65328, Tubing, Tygon, from peristaltic pump to rinse bottle or drain bottle, Agilent integrated autosampler (I-AS), 2 pieces

G1820-65016, Drain Tank (with PVC connector, 1 liter)

G3160-67000, Drain tube, PVC (Tygon), 3/32" x 5/32", 5 m

G1820-65515, Drain Tubing for aqueous or organic waste, ETFE core, 4 mm id, 6mm OD, 2.5 m length per unit

G3280-60077, Drain Tubing for aqueous waste, PVC Tygon®, 3 mm id, 6 mm OD, 3 m length per unit

G4912-80014, PFA Spray chamber drain tube assembly for inert kit

G3280-60555, Spray chamber drain tube assembly for Quartz Scott double-pass

5042-4769, Tank, drain or rinse, polyethylene, 4 L

G1820-65505, Tank, drain, for organic solvent, polypropylene connector, 2 L

G3666-67026, Argon gas supply tubing set for Argon gas purifier, Big Universal Trap, for use with 8900 ICP-MS

G3138-65138, ISIS tubing for gas line, PTFE, 3 mm id, 4 mm od, 5 m length

G3270-65035, ORS cell gas tubing, stainless steel, 1/8 in od, 6 m

G3280-20663, ORS cell tubing for reaction cell gas, PTFE, 1ea

G3280-60163, Tubing and filter for Argon supply to instrument, for Agilent ICP-MS with s-lens for semiconductor analysis

G3280-60160, Tubing and filter for Argon supply to instrument, for Agilent ICP-MS with x-lens

G3280-67022, Tubing for external carrier, makeup and dilution gas, 1pc tubing for each. Suitable for 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS.

G3280-67023, Tubing for plasma and auxiliary gas inside torch box, black with inner sleeve, 1pc tubing for each. Suitable for 7700/8800 ICP-MS.

G8411-67117, AVS MS sample loop tubing, PFA, 1.0 mm id, 1/16 inch od, 5 m

G8411-67118, AVS MS sample loop tubing, PFA, 2.18 mm id, 1/8 inch od, 5 m

G1820-65531, ISIS-DS Sample uptake tubing, PFA with PEEK guide, 0.3 mm id, 1.6 mm od, 70 cm, 5/pk

G1820-65526, ISIS-DS, Sample tubing, PFA with PEEK guide, 0.15 mm id, 1.6 mm od, 70 cm, 5/pk

G1820-65527, ISIS-DS, Sample tubing, PFA with PEEK guide, 0.2 mm id, 1.6 mm od, 70 cm, 5/pk

CP913777, Sample inlet tubing for inert Mira Mist nebulizer used with ICP-OES/ICP-MS

G1833-65572, Sample tubing, PFA, 0.15 mm id, 1.6 mm od, 70 cm, 3/pk

G1833-65573, Sample tubing, PFA, 0.2 mm id, 1.6 mm od, 70 cm, 3/pk

G1820-65478, Sample tubing, PFA, 0.3 mm id, 1.6 mm od, 3 m, for online internal standard addition. Standard for all Agilent ICP-MS used with ISTD T-joint

G1820-65105, Sample tubing, PFA, 0.5mm ID, 1.6mm OD, 5m. Standard sample uptake tubing used with Agilent ICP-MS

G3266-80010, Sample uptake tube and connector, EzyFit, 0.25 mm id, 700 mm capillary, for MicroMist concentric nebulizer, 10/pk.

G3266-80011, Sample uptake tube and connector, EzyFit, 0.5 mm id, 700 mm capillary, for MicroMist concentric nebulizer, 10/pk.

G3266-80013, Sample uptake tube and connector, UniFit, 0.25 mm id, with 0.25 mm id x 700 mm capillary, for U-Series MicroMist concentric nebulizer, 10/pk

G3266-80012, Sample uptake tube and connector, UniFit, 0.5 mm id, with 0.5 mm id x 700 mm capillary, for U-Series MicroMist concentric nebulizer, 10/pk

G3266-80015, EzyLok gas connector for carrier gas, suits most concentric nebulizers used with ICP-OES/MS

G1820-65052, Nebulizer gas connector to Quartz concentric nebulizer G1820-65138

G3266-80017, Nebulizer gas fitting, with PEEK ratchet connector

G1833-65583, Nebulizer gas line connector for Microflow PFA concentric nebulizer

5064-8078, Nebulizer gas line connector, Union fitting, 4 mm diameter Argon gas tube, for C-Flow PFA concentric nebulizer

G3285-80001, Nebulizer, C-Flow with Agilent I-AS probe, inert PFA, self-aspirates at 200 μL/min

G3285-80003, Nebulizer, C-Flow with Agilent I-AS probe, inert PFA, self-aspirates at 50 μL/min

G3285-80000, Nebulizer, C-Flow, inert PFA, self-aspirates at 200 µL/min

G3285-80002, Nebulizer, C-Flow, inert PFA, self-aspirates at 50 µL/min

G1820-65138, Nebulizer, concentric, quartz, recommended for organic and high purity analysis

G3139-65108, Nebulizer, MicroFlow with Agilent I-AS probe, inert PFA, self-aspirates at 20-50 μL/min

G3139-65102, Nebulizer, MicroFlow with Agilent I-AS probe, inert PFA, self-aspirates at 200 μL/min, standard on Agilent ICPMS with s-lens (semicon) and I-AS

G3139-68000, Nebulizer, MicroFlow with Agilent SPS4 probe, inert PFA, self-aspirates at 200 μL/min

G3139-65106, Nebulizer, MicroFlow, inert PFA, self-aspirates at 20-50 μL/min

G3139-65100, Nebulizer, MicroFlow, inert PFA, self-aspirates at 200 μL/min, standard on Agilent ICP-MS with s-lens (semicon)

G3266-80005, Nebulizer, MicroMist, U-series with UniFit sample connector and threaded Direct Connection gas line, standard with Agilent 8900 Series ICP-MS

G3266-80004, Nebulizer, MicroMist, U-series with UniFit sample connector, standard with Agilent 7800/7850/7900 Series ICP-MS

G3266-65003, Nebulizer, MicroMist, with EzyFit sample connector, standard with Agilent 7700x/e, 8800 and 7500cx/ce ICP-MS

G3161-80001, Nebulizer, Mira Mist, PEEK, for high TDS applications, suitable for all Agilent ICP-MS series

G3161-80000, Nebulizer, Mira Mist, PTFE, for high TDS applications with HF and Organic Solvent, suitable for all Agilent ICP-MS series

0535-1082, Nut for nebulizer connection at Scott spray chamber end cap for Agilent ICP-MS

CP913777, Sample inlet tubing for inert Mira Mist nebulizer used with ICP-OES/ICP-MS

G3266-80010, Sample uptake tube and connector, EzyFit, 0.25 mm id, 700 mm capillary, for MicroMist concentric nebulizer, 10/pk.

G3266-80011, Sample uptake tube and connector, EzyFit, 0.5 mm id, 700 mm capillary, for MicroMist concentric nebulizer, 10/pk.

G3266-80013, Sample uptake tube and connector, UniFit, 0.25 mm id, with 0.25 mm id x 700 mm capillary, for U-Series MicroMist concentric nebulizer, 10/pk

G3266-80012, Sample uptake tube and connector, UniFit, 0.5 mm id, with 0.5 mm id x 700 mm capillary, for U-Series MicroMist concentric nebulizer, 10/pk

G1820-60160, Sample uptake tubing connector for quartz concentric nebulizer, with FPM O-ring

G3280-80602, Total consumption nebulizer, suits capillary LC interface kit used with Agilent ICP-MS

G1833-65583, Nebulizer gas line connector for Microflow PFA concentric nebulizer

5064-8078, Nebulizer gas line connector, Union fitting, 4 mm diameter Argon gas tube, for C-Flow PFA concentric nebulizer

G3285-80001, Nebulizer, C-Flow with Agilent I-AS probe, inert PFA, self-aspirates at 200 μL/min

G3285-80003, Nebulizer, C-Flow with Agilent I-AS probe, inert PFA, self-aspirates at 50 μL/min

G3285-80000, Nebulizer, C-Flow, inert PFA, self-aspirates at 200 µL/min

G3285-80002, Nebulizer, C-Flow, inert PFA, self-aspirates at 50 µL/min

G3139-65108, Nebulizer, MicroFlow with Agilent I-AS probe, inert PFA, self-aspirates at 20-50 μL/min

G3139-65102, Nebulizer, MicroFlow with Agilent I-AS probe, inert PFA, self-aspirates at 200 μL/min, standard on Agilent ICPMS with s-lens (semicon) and I-AS

G3139-68000, Nebulizer, MicroFlow with Agilent SPS4 probe, inert PFA, self-aspirates at 200 μL/min

G3139-65106, Nebulizer, MicroFlow, inert PFA, self-aspirates at 20-50 μL/min

G3139-65100, Nebulizer, MicroFlow, inert PFA, self-aspirates at 200 μL/min, standard on Agilent ICP-MS with s-lens (semicon)

G3161-80001, Nebulizer, Mira Mist, PEEK, for high TDS applications, suitable for all Agilent ICP-MS series

G3161-80000, Nebulizer, Mira Mist, PTFE, for high TDS applications with HF and Organic Solvent, suitable for all Agilent ICP-MS series

CP913777, Sample inlet tubing for inert Mira Mist nebulizer used with ICP-OES/ICP-MS

G1833-65583, Nebulizer gas line connector for Microflow PFA concentric nebulizer

5064-8078, Nebulizer gas line connector, Union fitting, 4 mm diameter Argon gas tube, for C-Flow PFA concentric nebulizer

G3285-80001, Nebulizer, C-Flow with Agilent I-AS probe, inert PFA, self-aspirates at 200 μL/min

G3285-80003, Nebulizer, C-Flow with Agilent I-AS probe, inert PFA, self-aspirates at 50 μL/min

G3285-80000, Nebulizer, C-Flow, inert PFA, self-aspirates at 200 µL/min

G3285-80002, Nebulizer, C-Flow, inert PFA, self-aspirates at 50 µL/min

G3139-65108, Nebulizer, MicroFlow with Agilent I-AS probe, inert PFA, self-aspirates at 20-50 μL/min

G3139-65102, Nebulizer, MicroFlow with Agilent I-AS probe, inert PFA, self-aspirates at 200 μL/min, standard on Agilent ICPMS with s-lens (semicon) and I-AS

G3139-68000, Nebulizer, MicroFlow with Agilent SPS4 probe, inert PFA, self-aspirates at 200 μL/min

G3139-65106, Nebulizer, MicroFlow, inert PFA, self-aspirates at 20-50 μL/min

G3139-65100, Nebulizer, MicroFlow, inert PFA, self-aspirates at 200 μL/min, standard on Agilent ICP-MS with s-lens (semicon)

G3280-80081, Quartz Torch, single-piece, 1.0 mm id tapered injector, for volatile organic solvent analysis with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS.

G3280-80080, Quartz Torch, single-piece, 1.5 mm id tapered injector, for organic solvent analysis with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS.

G3270-80043, Quartz Torch, single-piece, 2.5 mm id injector, standard for Agilent 7500 ICP-MS.

G3280-80053, Quartz Torch, single-piece, 2.5 mm id injector, standard for Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS.

G4912-80012, Semi-demountable inert torch for PFA inert kit, used with 2.5mm id sapphire or platinum injector for aqeous applications

G1833-65430, Clamp for connection of ball and socket joint on spray chamber outlet, quartz connector and torch inlet, 2/pk

G1833-65419, Long life Pt shield plate for ShieldTorch for use with Agilent ICP-MS single-piece and semi-demountable quartz torch

G1833-65421, ShieldTorch bonnet, quartz for use with Agilent ICP-MS single-piece and semi-demountable quartz torch

G4912-80011, Injector, platinum, 1.5 mm id, for PFA inert kit, for organic solvent analysis in semiconductor applications

G3285-80035, Injector, platinum, 2.5 mm id, for PFA inert kit, for aqueous samples in semiconductor applications

G4912-80010, Injector, sapphire, 1.5 mm id, for PFA inert kit, for organic solvent analysis

G3285-80036, Injector, sapphire, 1.5 mm id, with Oxygen gas port, for PFA inert kit, for organic solvent analysis

G3285-80034, Injector, sapphire, 2.5 mm id, for PFA inert kit, for aqueous samples

G1833-65416, Obsolete. No replacement recommendation.

G1833-66011, Alignment plate for RF work coil, for all Agilent ICP-MS

G3280-60638, RF work coil assembly, for Agilent 7700 and 8800 ICP-MS

G8400-60434, RF work coil assembly, for Agilent 7800, 7850, 7900 and 8900 ICP-MS

5430-0063, ADS 2 syringe, plunger holding screw, 2/pk

5005-0454, Drip tray, for ADS 2, 1/pk

5299-0038, Syringe, 10 mL, for ADS 2 diluter, 1/pk

5299-0036, Syringe, 10 mL, high-purity quartz, for ADS 2 diluter, 1/pk

5299-0037, Syringe, 5 mL, for ADS 2 diluter, 1/pk

5005-0473, ADS 2 port plug kit, for valve A, 3/pk

5005-0477, ADS 2 supplies kit, for ICP-MS

5005-0476, ADS 2 supplies kit, for ICP-OES

5005-0105, ADS 2 tubing kit, carrier/diluent, 2/pk

5005-0103, ADS 2 tubing kit, valve A-valve C, 1/pk

5005-0102, ADS 2 tubing kit, valve B set-up, 4/pk

5005-0106, ADS 2 tubing kit, valve C set-up, 2/pk

5005-0107, ADS 2 tubing kit, valve C-AVS Pump, 1/pk

5005-0182, ADS 2 tubing kit, valve C-AVS valve, 1/pk

5005-0475, Replacement tubing for ADS 2 valves, for ICP-MS

5005-0474, Replacement tubing for ADS 2 valves, for ICP-OES

5005-0453, Tubing clips, for ADS 2, 6/pk

G8457-68004, Tubing kit, Valve A-AVS Valve, for ADS 2, 1/pk

5005-0436, Diluent bottle kit for ICP-MS, containing PFA bottle, 2 L

5043-1219, InfinityLab stay safe cap, GL45, 3 ports

5043-1214, InfinityLab Stay Safe fitting for 1.6 mm od tubing, 2/pk

5043-1216, InfinityLab Stay Safe fitting for 3.2 mm od tubing, 2/pk

5043-1190, InfinityLab Stay Safe venting valve with time strip

5043-1196, InfinityLab waste can, GL45, 6 liter

5299-0039, PFA bottle, 2 L, with GL45 closure , 1/pk

5005-0435, Rinse/diluent bottle kit, containing HDPE bottle, 6 L

5043-1198, Screw plug, fitting port, PTFE, 2/pk

5043-1193, InfinityLab Stay Safe charcoal filter with time strip, 58 gramm

5043-1326, Stay Safe cap, S60, 4 ports, for spectroscopy

5043-1337, Waste can, 10 L, with S60 thread

5005-0437, Waste container kit

5005-0452, Loop holder, for AVS/ADS 2, 1/pk

5005-0030, Sample loop, Easy-fit, 0.25 mL volume, 15s acq. time, 1.00 mm id

5005-0031, Sample loop, Easy-fit, 0.50 mL volume, 25s acq. time, 1.00 mm id

5005-0032, Sample loop, Easy-fit, 0.75 mL volume, 50s acq. time, 1.00 mm id

5005-0033, Sample loop, Easy-fit, 1.00 mL volume, 80s acq. time, 1.00 mm id

5005-0038, Sample loop, Easy-fit, 1.00 mL volume, 80s acq. time, 2.18 mm id

5005-0039, Sample loop, Easy-fit, 1.25 mL volume, 105s acq. time, 2.18 mm id

5005-0034, Sample loop, Easy-fit, 1.25 mL volume, 115s acq. time, 1.00 mm id

5005-0040, Sample loop, Easy-fit, 1.50 mL volume, 130s acq. time, 2.18 mm id

5005-0035, Sample loop, Easy-fit, 1.50 mL volume, 145s acq. time, 1.00 mm id

5005-0036, Sample loop, Easy-fit, 2.00 mL volume, 210s acq. time, 1.00 mm id

5005-0041, Sample loop, Easy-fit, 2.00 mL volume, 260s acq. time, 2.18 mm id

5005-0042, Sample loop, Easy-fit, 2.50 mL volume, 365s acq. time, 2.18 mm id

5005-0037, Sample loop, Easy-fit, 2.50 mL volume, 375s acq. time, 1.00 mm id

5005-0043, Sample loop, Easy-fit, 3.00 mL volume, 410s acq. time, 2.18 mm id

5005-0044, Sample loop, Easy-fit, 4.00 mL volume, 645s acq. time, 2.18 mm id

5005-0421, Sample loop, for ADS/AVS, 0.50 mL, 1.00 mm id, 1/pk

5005-0422, Sample loop, for ADS/AVS, 0.75 mL, 1.00 mm id, 1/pk

5005-0423, Sample loop, for ADS/AVS, 1.00 mL, 1.00 mm id, 1/pk

5005-0424, Sample loop, for ADS/AVS, 1.25 mL, 1.00 mm id, 1/pk

5005-0425, Sample loop, for ADS/AVS, 1.50 mL, 1.00 mm id, 1/pk

5005-0426, Sample loop, for ADS/AVS, 2.00 mL, 1.00 mm id, 1/pk

5005-0427, Sample loop, for ADS/AVS, 2.50 mL, 1.00 mm id, 1/pk

5005-0449, Sample loop, for ADS/AVS, 3.00 mL, 1.00 mm id, 1/pk

5005-0428, Sample loop, for AVS MS, 1.00 mL, 2.18 mm id, 1/pk

5005-0429, Sample loop, for AVS MS, 1.25 mL, 2.18 mm id, 1/pk

5005-0430, Sample loop, for AVS MS, 1.50 mL, 2.18 mm id, 1/pk

5005-0431, Sample loop, for AVS MS, 2.00 mL, 2.18 mm id, 1/pk

5005-0432, Sample loop, for AVS MS, 2.50 mL, 2.18 mm id, 1/pk

5005-0433, Sample loop, for AVS MS, 3.00 mL, 2.18 mm id, 1/pk

5005-0434, Sample loop, for AVS MS, 4.00 mL, 2.18 mm id, 1/pk

5005-0420, Sample loop, for AVS, 0.25 mL, 1.00 mm id, 1/pk

5005-0450, Sample loop, for AVS, 3.50 mL, 1.00 mm id, 1/pk

5005-0452, Loop holder, for AVS/ADS 2, 1/pk

5005-0421, Sample loop, for ADS/AVS, 0.50 mL, 1.00 mm id, 1/pk

5005-0422, Sample loop, for ADS/AVS, 0.75 mL, 1.00 mm id, 1/pk

5005-0423, Sample loop, for ADS/AVS, 1.00 mL, 1.00 mm id, 1/pk

5005-0424, Sample loop, for ADS/AVS, 1.25 mL, 1.00 mm id, 1/pk

5005-0425, Sample loop, for ADS/AVS, 1.50 mL, 1.00 mm id, 1/pk

5005-0426, Sample loop, for ADS/AVS, 2.00 mL, 1.00 mm id, 1/pk

5005-0427, Sample loop, for ADS/AVS, 2.50 mL, 1.00 mm id, 1/pk

5005-0449, Sample loop, for ADS/AVS, 3.00 mL, 1.00 mm id, 1/pk

5005-0428, Sample loop, for AVS MS, 1.00 mL, 2.18 mm id, 1/pk

5005-0429, Sample loop, for AVS MS, 1.25 mL, 2.18 mm id, 1/pk

5005-0430, Sample loop, for AVS MS, 1.50 mL, 2.18 mm id, 1/pk

5005-0431, Sample loop, for AVS MS, 2.00 mL, 2.18 mm id, 1/pk

5005-0432, Sample loop, for AVS MS, 2.50 mL, 2.18 mm id, 1/pk

5005-0433, Sample loop, for AVS MS, 3.00 mL, 2.18 mm id, 1/pk

5005-0434, Sample loop, for AVS MS, 4.00 mL, 2.18 mm id, 1/pk

G8010-60338, Sample loop, for AVS switching valve, 0.25 mL volume

G8010-60339, Sample loop, for AVS switching valve, 0.5 mL volume

G8010-60305, Sample loop, for AVS switching valve, 1.0 mL volume

G8010-60340, Sample loop, for AVS switching valve, 1.5 mL volume

G8010-60341, Sample loop, for AVS switching valve, 2.0 mL volume

G8010-60342, Sample loop, for AVS switching valve, 2.5 mL volume

G8010-60343, Sample loop, for AVS switching valve, 3.0 mL volume

G8010-60344, Sample loop, for AVS switching valve, 3.5 mL volume

5005-0420, Sample loop, for AVS, 0.25 mL, 1.00 mm id, 1/pk

5005-0450, Sample loop, for AVS, 3.50 mL, 1.00 mm id, 1/pk

9910143300, Sample loop, for SVS 2, 0.5 mL volume

9910143400, Sample loop, for SVS 2, 1.0 mL volume

1510249400, Probe retaining nut, knurled, M10 x 1.25, for SPS 3 autosampler

G8480-80002, Probe, carbon fiber, inert, 1.2 mm id, 3 mm od, for Agilent SPS3 Autosampler, replacement only, requires carbon fiber update kit (G8480-80001)

G8480-80001, Probe, carbon fiber, update kit, for Agilent SPS3 Autosampler

9910111900, Probe, inert, 0.8 mm id, PTFE-sleeved, for use with MP-AES and ICP-OES instruments (without diluter)

9910112000, Probe, inert, 1.0 mm id, PTFE-sleeved, for SPS 3 autosampler for operation with AA, MP-AES, ICP-OES, and UV-Vis instruments (or with diluter)

9910130900, Probe, inert, 1.3 mm id, PTFE-sleeved, for SPS 3 autosampler

G3286-80101, Sample probe, 0.3 mm id, Agilent ASX-500 series autosampler, black band

G3286-80102, Sample probe, 0.5 mm id, Agilent ASX-500 series autosampler, blue band

G3286-80100, Sample probe, 0.8 mm id, Agilent ASX-500 series autosampler, red band

G3286-80119, Sample probe, carbon fiber, 1.0 mm id (2 blue bands), for ASX 500 autosampler

G8410-80100, SPS 4 probe 0.25 mm id with red markers, inert FEP sleeved for SPS 4 autosampler

G8410-80101, SPS 4 probe 0.5 mm id with yellow markers. Inert, FEP sleeved for SPS 4 autosampler

G8410-80102, SPS 4 probe 0.8 mm id with green markers. Inert, FEP sleeved for SPS 4 autosampler

G8410-80103, SPS 4 probe 1.0 mm id with blue markers. Inert, FEP sleeved for SPS 4 autosampler

G8410-80104, SPS 4 probe 1.2 mm id with black markers. Inert, FEP sleeved for SPS 4 autosampler

G8410-80105, SPS 4 probe suits SPS 4 microtiter tray.

G3286-80111, Standard carbon fiber sample probe, 0.3 mm id., black band

G3286-80112, Standard carbon fiber sample probe, 0.5 mm id., blue band

G3286-80110, Standard carbon fiber sample probe, 0.8 mm id., red band

3710034800, High acid tolerant PVC Solvaflex Peristaltic pump tubing, black/black 2 bridged.

3710033700, Joining tube, PVC, 0.030 inch id

3710052000, Pump tubing for UV/Vis instruments, 3 bridged, purple/black, 12/pk

5043-0065, PVC flexible ducting 50 mm id, 5 m length for use with Agilent SPS 4 autosampler. Fitted with 56 mm od EPDM cuffs on each end of the tubing

G8410-80123, Replacement tubing for inlet rinse solution supply to rinse station of Agilent SPS 4 autosampler

3710026400, Silicon tubing, 1 mm id, 3 mm od

3710069200, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, 3-bridged, black/black tabs, flared ends, 0.76 mm id

3710049000, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, 3-bridged, gray/gray tabs, 1.3 mm id

5043-0063, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, 3-bridged, purple/white tabs, 2.79 mm id

3710069000, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, orange/yellow tabs, flared ends, 0.51 mm id

3710069300, SPS 3/4 High acid tolerant PVC Solvaflex Peristaltic pump tubing, yellow/yellow tabs, 1.42 mm id, 12/pk

3710069100, SPS 3/4 Organic resistant (aromatic) FPM Peristaltic pump tubing, black/black tabs, flared ends, 0.76 mm id

3710057500, SPS 3/4 Organic resistant (ketones) Santoprene, pump tubing, 3-bridged, gray/gray, 6/pk

G3286-80118, Tubing and connector kit, drain pump, Tygon, Agilent ASX-500 series autosampler

G3286-80117, Tubing hook-up kit, rinse/drain, Agilent ASX-500 series autosampler, 3/16 in id, 72 in, 1/8 in id, 84 in

3710031500, Tubing, 1/8 inch id, 1/4 inch od, 1/16 inch wall thickness.

3710037100, Tubing, PTFE, 1.0 mm id, 0.3 mm wall, sample line for SPS 3 autosampler probe, per meter

G8410-80122, Tubing, PVC, 8 mm od, 5 mm id, 2 m

G8410-20012, Tubing, solvent resistant, 0.093 inch id, 2 m

G8410-20013, Tubing, solvent-resistant, 0.187 inch id, 2 m

190065400, Agilent SPS 3 autosampler operating supplies kit

G8410-80200, Autosampler trolley, with ergonomic handle, two shelves, and lockable castors for ease-of-use, for use with Agilent autosamplers

G8410-60100, Cover kit, for Agilent SPS 4 Autosampler

G8410-68260, High uptake volume rinse kit, for Agilent SPS 4 Autosampler

G8480-80001, Probe, carbon fiber, update kit, for Agilent SPS3 Autosampler

G8410-68262, Pump drain kit, for Agilent SPS 4 Autosampler

G8410-68261, Rinse tube kit, for Agilent SPS 4 Autosampler, for low-volatile organic solvents in rinse station

9910130600, SPS3 exhaust port connection

190065400, Agilent SPS 3 autosampler operating supplies kit

G8410-80200, Autosampler trolley, with ergonomic handle, two shelves, and lockable castors for ease-of-use, for use with Agilent autosamplers

G8410-80124, Barb connector, 2.5 mm to 1.5 mm id

0100-2848, Barb connector, straight-through, 2.4 mm id, for Agilent SPS 4 autosampler

0100-2846, Barb connector, straight-through, 4.8 mm to 2.4 mm id, for Agilent SPS 4 autosampler

G8410-40005, Cable ducting, for Agilent SPS 4 autosampler

G8410-67001, Cable ties, natural polypropylene, for use with Agilent SPS 4 autosampler, 10/pk

G1820-65016, Drain Tank (with PVC connector, 1 liter)

G8410-60150, Dual-port fixed wash reservoir kit, for Agilent SPS 4 Autosampler

G8410-80121, Replacement nipple, polypropylene, 2.5 mm id

G8410-80120, Replacement nipple, polyvinylidene difluoride, 5 mm id

6610025100, Replacement spill tray

6610011800, Rinse reservoir, Agilent SPS 3 autosampler, 10 L

G3286-80224, Rinse station, Agilent ASX-500 series autosampler

G8410-60140, Single-port fixed wash reservoir kit, for Agilent SPS 4 Autosampler

G8410-80605, Spill tray kit, for Agilent SPS 4 Autosampler

9910130600, SPS3 exhaust port connection

G8410-80111, Standard rack location mat, for Agilent SPS 4 Autosampler

G8410-40004, Tube anchor, for Agilent SPS 4 autosampler

G3286-80118, Tubing and connector kit, drain pump, Tygon, Agilent ASX-500 series autosampler

G3286-80117, Tubing hook-up kit, rinse/drain, Agilent ASX-500 series autosampler, 3/16 in id, 72 in, 1/8 in id, 84 in

CP913584, Tubing kit, Z-axis drive, for Agilent ASX 130/260 autosamplers

3710031500, Tubing, 1/8 inch id, 1/4 inch od, 1/16 inch wall thickness.

G1680-63720, USB 2.0 cable, 10 feet, for G7201A MassHunter software in Agilent 7700 series ICP-MS

G3286-80330, Z-axis drive assembly with nylon cable (PEEK, anti-kink). Suits Agilent ASX 520 autosampler used with Agilent 7700/8800 Series ICP-MS

6610026000, Rack overlay for 40-position sample rack for SPS 3 autosampler, allows 40 x 18 mm od tubes to be used in the rack.

6610026100, Rack overlay for 60-position sample rack for SPS 3 autosampler, allows 60 x 13 mm od tubes to be used in the rack.

6610026400, Sample rack for 13 mm od tubes, 90 positions

6610025400, Sample rack for 16 mm od tubes, 60 positions

6610025500, Sample rack for 20 mm od tubes, 40 positions

6610026500, Sample rack for 25 mm od tubes, 24 positions

6610026600, Sample rack for 30 mm od tubes, 21 positions

G3286-80106, Sample rack, Agilent ASX-500 series autosampler, holds 14mL vials, 60 positions

G3286-80103, Sample rack, Agilent ASX-500 series autosampler, holds 50 mL vials, 21 positions

G8410-80111, Standard rack location mat, for Agilent SPS 4 Autosampler

810166900, Standards rack, 11-position, for 16 mm od tubes in SPS 3 autosampler

810167000, Standards rack, 6-position, for 29 mm od tubes in SPS 3 autosampler

G8410-40000, Standards rack, for Agilent SPS 4 Autosampler, 34-position.

G8410-40001, Standards rack, for Agilent SPS 4 Autosampler, 5-position.

190065200, Centrifuge tube, polypropylene, graduated, 29 mm od, 115 mm, conical base, wide neck, threaded top, 500/pk

190047900, Digestion tubes, 50 mL, with threaded, natural linerless cap, 500/pk

3710051100, Polypropylene tubes, 16 mm OD, 125/case

5043-0064, Sample bottle, 250 mL, 60 mm od, narrow neck LDPE for 5 position standard rack used with SPS 4 autosampler

5190-9092, Test tubes, 16 x 150 mm, 21 mL, 250/pk

00000001600L, Test tubes, polypropylene, 17 mm od, 16.5 mL, 1000/case

190049700, Tube, polypropylene, 16 mm od, 125 mm, 1000/case

5043-0064, Sample bottle, 250 mL, 60 mm od, narrow neck LDPE for 5 position standard rack used with SPS 4 autosampler

G3286-80106, Sample rack, Agilent ASX-500 series autosampler, holds 14mL vials, 60 positions

G3286-80103, Sample rack, Agilent ASX-500 series autosampler, holds 50 mL vials, 21 positions

G8410-80111, Standard rack location mat, for Agilent SPS 4 Autosampler

810166900, Standards rack, 11-position, for 16 mm od tubes in SPS 3 autosampler

G8410-40000, Standards rack, for Agilent SPS 4 Autosampler, 34-position.

G8410-40001, Standards rack, for Agilent SPS 4 Autosampler, 5-position.

G3160-60015, Holder for carry tray cover, Agilent integrated autosampler (I-AS)

G3160-65324, I-AS autosampler needle, PFA, 0.8 mm id

G3160-65306, I-AS autosampler needle, standard probe, PFA, 0.3 mm id

G3160-80041, I-AS autosampler needle/probe holder

G3160-65307, I-AS autosampler rinse bottle, external, 100 mL, with caps, 6/pk

G3160-80200, I-AS autosampler Serial-USB converter cable

G3160-65325, I-AS autosampler Tubing holder, PEEK

G3160-60016, I-AS table assy for 7900

G3160-65327, Peristaltic pump tubing set for pumping drain/uptake, for Agilent integrated autosampler (I-AS), Tygon, with connectors, 5/pk

G3160-80060, Sample Tray A for Agilent Integrated Autosampler (I-AS), with 89 positions for 6 mL polypropylene vials

G3160-80061, Sample Tray B for Agilent Integrated Autosampler (I-AS), with 53 positions for 18 mL polypropylene vials

G3160-80062, Sample Tray C for Agilent Integrated Autosampler (I-AS), with 18 positions for 50 mL polypropylene vials

G3160-65321, Sample Tray cover for Agilent integrated autosampler (I-AS)

G3160-80063, Sample Tray D for Agilent Integrated Autosampler (I-AS), with 79 positions for 1.5 or 2 mL and 10 positions for 18 mL polypropylene vials

G3160-80064, Sample Tray E for Agilent Integrated Autosampler (I-AS), with 79 positions for 6 mL and 10 positions for 18 mL polypropylene vials

G3160-80065, Sample Tray F for Agilent Integrated Autosampler (I-AS), with 15 positions for 48 mm od vials

G3160-80066, Sample Tray G for Agilent integrated autosampler (I-AS), with 28 positions for 20 mL PFA vials up to 28 mm od x 58 mm tall

G3160-65326, Tubing, peristaltic pump, for pumping drain/uptake, for Agilent integrated autosampler (I-AS)

G3160-65320, Tubing, rinse solution inlet/outlet, Agilent integrated autosampler (I-AS)

G3160-65328, Tubing, Tygon, from peristaltic pump to rinse bottle or drain bottle, Agilent integrated autosampler (I-AS), 2 pieces

G3160-65317, Vial, perfluoroalkoxy (PFA), 1.5 mL, 11.8 mm od at base, 14.2 mm od at top, 23 mm tall, conical base, for I-AS tray type D (89-position), 10/pk

G3160-65315, Vial, polyethylene, 2 mL, 12 mm od, 24.5 mm tall, conical base, for Agilent integrated autosampler (I-AS) tray type D (89-position), 200/pk

G3160-65304, Vial, polypropylene, 18 mL, 21.5 mm od, 55 mm tall, for Agilent integrated autosampler (I-AS) trays type B, D and E, 55/pk

G3160-65305, Vial, polypropylene, 50 mL, 41 mm od, 41.5 mm tall, for Agilent integrated autosampler (I-AS) tray type C (18-position), 20/pk

G3160-65303, Vial, polypropylene, 6 mL, 15 mm od, 54.5 mm tall, for Agilent integrated autosampler (I-AS) trays type A and E, 200/pk

G8410-60100, Cover kit, for Agilent SPS 4 Autosampler

G8410-60150, Dual-port fixed wash reservoir kit, for Agilent SPS 4 Autosampler

G8410-68260, High uptake volume rinse kit, for Agilent SPS 4 Autosampler

G8410-60180, Nebulizer probe mount kit for Agilent SPS 4 autosampler

G8410-68262, Pump drain kit, for Agilent SPS 4 Autosampler

5043-0065, PVC flexible ducting 50 mm id, 5 m length for use with Agilent SPS 4 autosampler. Fitted with 56 mm od EPDM cuffs on each end of the tubing

G8410-68261, Rinse tube kit, for Agilent SPS 4 Autosampler, for low-volatile organic solvents in rinse station

5043-9311, 96-well plate, 0.5 mL, round wells, U shape, polypropylene, 14 mm, 120/pk

5043-9310, 96-well plate, 0.5 mL, round wells, U shape, polypropylene, 14 mm, 30/pk

5042-1386, Obsolete. Replaced by 5043-9310.

5042-1385, Obsolete. Replaced by 5043-9311.

G8410-80105, SPS 4 probe suits SPS 4 microtiter tray.

G8410-68270, Well-plate startup kit, for Agilent SPS 4 Autosampler

G8410-40003, Well-plate tray adaptor kit, for Agilent SPS 4 Autosampler

8003-0629, Cleaning wire, for autosampler probe, for AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0625, Corrosion resistant sampling probe, 0.6 mm id, probe only, for AS-90/90A/90 Plus/91/93 Plus autosamplers

8003-0627, Corrosion-resistant sampling probe, 1.0 mm id, probe only, for AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0616, FIAS sampling probe assembly, 0.6 mm id, for AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0623, FIAS sampling probe assembly, corrosion resistant, 0.6 mm id FEP.

8003-0617, FIAS standard sampling probe assembly, 1.0 mm id, for AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0624, FIAS standard sampling probe assembly, corrosion resistant, 1.0 mm id FEP.

8003-0615, Flame AA sampling probe assembly, 0.6 mm id, stainless steel, for AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0622, Flame AA sampling probe assembly, corrosion resistant, 0.6 mm id FEP.

8003-0618, Sampling probe and screw fitting, stainless steel, for AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0665, Adapter type M with 1⁄4 inch (6.4 mm) external thread, for 4 mm od nipple, 1/pk

8003-0619, Capillary tubing assembly, 1 m, 0.6 mm id, 1 fitting, red, for AS stainless steel probe, for flame AA, AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0620, Capillary tubing assembly, 1 m, 0.6 mm id, 2 fittings, red, for AS stainless steel probe, for FIAS, for AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0621, Capillary tubing assembly, 1 m, 1.0 mm id, 2 fittings, blue, for AS stainless steel probe, for FIAS, for AS-90/90A/90plus/91/93plus/S10 autosamplers

8003-0646, Peristaltic pump tubing, Marprene 3-stop, 1.14 mm id, red/red tabs, for AS-93plus/S10 autosampler, 6/pk

8003-0645, Peristaltic pump tubing, Marprene 3-stop, 2.79 mm id, purple/white tabs, for AS-93plus/S10 autosampler, 6/pk

6610022500, Microplate, 96-well, fluorescence, black nonsterile, high-binding, 10/pk

6610022400, Microplate, 96-well, fluorescence, white, nonsterile, high-binding, 10/pk

6610022300, Microplate, 96-well, fluorescence, white, sterile, untreated, 10/pk

110674800, Assy Diffuser - Silica

110678600, Cell holder for holmium perchlorate cuvette

7910043800, Eclipse Ratio 340_380 filters

7910043900, Eclipse Ratio 405_495 filters

110380500, Extension lead, long, for Cary temperature probe accessory holder, required for mounting the probe outside the sample compartment

110381100, Extension lead, short, for Cary temperature probe holder, required for mounting the probe inside the sample compartment

9910103100, Kit Cuvette 12.5 x 12.5mm Holder

9910103200, Kit doors for thermostatedd access, 1/pk

9910102900, Kit Edge Mounting Sample Holder

9910103000, Kit Powder Cell, Single Crystal Holder

110666090, Long life Xenon lamp module

110677500, Neutral density attenuator 1.5 Abs, spare

2010041990, Round silica window, 12 mm, 5/pk

9910066900, Temperature probe holder for rectangular micro-cells

9910066800, Temperature probe holder for standard 10 mm rectangular cuvettes

210167490, Base plate for custom accessories, fluorescence

210167200, Cell holder base, fluorescence

110664700, Cell holder, fluorescence

10076700, Fiber optic coupler accessory, fluorescence

10076800, Fiber optic dip probe coupler accessory, fluorescence

7910043100, Fiber optic dip probe, fluorescence

7910043200, Fluorescence Probe Tip

7910043000, Fluorescence Remote Read FO Probe 2metre

9910104500, Kit Fluorescence fibre optic liquid tips

697-5392-2, 4X10 (40 BOTTLE RACK) SP6186

697-5392-3, 5X11 (55 BOTTLE RACK) SP6187

013-4825-1, Oil analyzer tool and part kit, 1/pk

884-2829, Polystyrene test film for oil analyzer

899-1599, PUMP HEAD, EASY-LOAD II

815-0631, Pump tubing, FPM fluoroelastomer polymer, 25 feet/pk

013-5353, Replacement ZnSe sample cell assembly, 1/pk

815-0619, Tubing, 1/4 in, precision FPM, 1/pk

815-0616, Tubing, PTFE, 3/32 in id x 5/32 in od, 1/pk

815-0640, Tubing, Tygon, fuel, 1/4 x 3/8 in, Agilent oil analyzer

815-0639, Tubing, Tygon, fuel, 1/8 x 1/4 in, Agilent oil analyzer

M7300-68002, Adhesive UV cured low-shrink, white, 10 mL

M7300-68011, Aluminum-coated filters, 25 mm diameter, 0.8 µm pore size, 25/pack

M7300-68001, Glue dispensing tips, smooth flow, tapered, 18 gauge, double helix Luer lock fitting, 150/pk

M7300-68009, Gold-coated filters, 25 mm diameter, 0.8 µm pore size, 25/pack

M7300-68010, Low-e (Kevley) slides, 25/pack

M7300-68008, Microplastics 25 mm filter holder kit

M7300-68007, Microplastics slide sample holder kit

M7310-68000, Microtome blade, diamond-finish, 50/pack

M7300-61014, Sacrificial laminate strip, 128/pk